Maxi-Cosi Capsule Adaptors - Travel System - Redsbaby Bounce Instruction Manual

Maxi-Cosi Capsule Adaptors - Travel System

Note: Accessory sold separately
Securing the adaptors to your
Redsbaby Bounce chassis
1. Ensure your chassis is assembled
correctly by following the instructions
in your Redsbaby Bounce Instruction
Manual.
2. Stand behind your Redsbaby Bounce
handle bar, and click the adaptor
marked with the 'R' symbol into the
right-hand side, with the 'R' symbol
facing outwards. You will hear and feel a
firm 'click' when the adaptor is in place.
3. Repeat with the adaptor with the 'L' symbol, clicking it into the left hand
side, with the 'L' symbol facing outwards. See Figure 2.
Securing your Maxi Cosi capsule into
your Redsbaby Bounce adaptors:
1. Hold the Maxi Cosi capsule facing
you, and using both hands push the
capsule down onto the adaptors to click
into place.
IMPORTANT:
has clicked in correctly, lift the handle of
the capsule upwards.
See Figure 3.
To remove your Maxi Cosi capsule
from your Redsbaby Bounce
adaptors:
1. Press the left and right release
buttons on the Maxi Cosi capsule. Lift
upwards.
See Figure 4.

To check that the capsule
R
FIGURE 2
FIGURE 3
PRESS
FIGURE 4
L
PRESS