Whirlpool Electric Dryer Installation Instructions Manual page 7

If dryer does not
operate properly...
If dryer will not operate, check the following
to be sure that:
A. Electrtcal supply is connected.
B. House fuse is intact and tight or circuit
breaker has not tripped.
C. Door is closed.
D. Controls are set in a running or 'On"
position.
E. Start button has been pushed firmly.
Part No. 3397597 Rev. C
01994
When moving your dryer...
l
Shut off electric supply to dryer.
l
Disconnect power supply cord and tape
securely to dryer.
9 Tape the drum to the front panel.
l
Tape the dryer door and lint screen.
l
Screw leveling legs all the way in.
Before having your electric dryer installed in
your new home, check with a licensed
electrician to confirm that the supply
voltage matches the voltage specified on
the serial/rating plate.
Benton Harbor, Michigan 49022
If you need
assistance...
Check your Use and Care Guide for a toll-
free number to call, or call the dealer from
whom you purchased this appliance. The
dealer is listed in the Yellow Pages of your
phone directory under "Appliances -
Household - Major - Service and Repair."
When you call, you will need the dryer
model number and serial number. Both
numbers are on the serial/rating plate
located in the door well behind dryer door
and on front of opening.
Printed on recycled paper.
10% post consumer waste/
50% recovered materials.
Printed in U.S.A.