Troubleshooting - KYMCO People GT 200i Service Manual

1. GENERAL INFORMATION

TROUBLESHOOTING

ENGINE WILL NOT START OR IS HARD TO START
1. Check for operation of the fuel pump
Normal
2. Inspect the fuel flow
Normal
3. Inspect the fuel injector
Normal
4. Perform spark test
Good spark
5. Test cylinder compression
Compression normal
6. Starting following normal procedure
Engine does not start
7. Remove and inspect spark plug
Abnormal
Abnormal
Abnormal
Weak or no spark
Low compression
Engine start
but stops
Wet plug
People GT 200i
Possible cause
Faulty fuel pump
Faulty pressure regulator
Faulty injector
Faulty spark plug
Fouled spark plug
Faulty ECU
Broken or shorted spark plug wire
Faulty ignition switch
Faulty ignition pulse generator
Loose or disconnected spark plug
wire
Valve stuck open
Worn cylinder and piston ring
Damaged cylinder head gasket
Seized valve
Improper valve timing
Intake pipe leaking
Improper ignition timing (Faulty
ignition coil or ignition pulse
generator)
Fuel contaminated
Throttle valve open
Clogged air cleaner
1-16