Loading/Ejecting Cassettes - JVC BR-DV600AE Instructions Manual

PREPARATION
Please use standard DV cassettes or mini DV cassettes.
Standard DV cassettes
Slide
REC
SAVE
Clip
Cassette indicator
A.DUB
PAL REC INH.
DVCAM NTSC
CH-1/3
INPUT SEL.
CH-2/4
LINE
DV Y/C
BR-DV3000
Memo
•
The cassette can be loaded/
ejected even when the unit is
in the OPERATE OFF mode.
•
The loading/ejection process
takes about 6 seconds.
•
Ejection cannot be done with
the wireless remote controller.
E-30

Loading/ejecting cassettes

–
Loading the cassette
1.
Check the cassette.
• Set the rear slide.
Push it to "REC" for recording or "SAVE" to prevent its contents
from being erased accidentally.
• Check that the tape is not slackened.
Use an object, such as a clip, to turn the reel in the direction of
the arrow. If the tape is taut, the reel will not rotate.
Reel
2.
Check that the cassette indicator on the unit is unlit.
When a cassette is loaded, the cassette indicator will lit up.
3.
Load the cassette.
• For the standard DV cassette, just align it with the cassette slot
and insert.
• For the mini DV cassette, load it in between the left and right guides.
EJECT Set the tape, window face up, and push the cassette in slowly
until it is drawn in automatically.
MENIU
¥ While the cassette is being loaded, the cassette indicator blinks.
REC PLAY PAUSE
SET
REW STOP
FF
EJECT button
Ejecting the cassette
1.
Press the EJECT button on the unit.
¥ Ejection begins. During ejection, the cassette indicator blinks.
2.
Eject the cassette.
The indicator lights up when cassette loading is complete.
Guide
Mini DV cassettes
–