Table of Contents
Advertisement
NOTES:
If "Err" appears on the display panel, repeat the steps again.
When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press MENU to return to normal
screen, and try again.
You can use 24H Express Timer programming function also
when the recorder is turned off.
For 24H Express Timer programming function, the program
overlap warning display does not appear even if some programs
overlap each other.
In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).
Check, cancel and replace programmes
A
Disengage timer mode
Press #, then press 1.
B
Access Program Check screen
Press ".
C
Access Program screen
Press " again to check more
information. Each time you press ", the
next programme's information appears.
D
Cancel or replace a programme
Press & to cancel a programme.
To replace a programme, press the appropriate button: START +/–,
STOP+/–, DATE+/–, PR +/–, DAILY, WEEKLY and/or p.
If you do not want to edit the programme title, skip steps 5 and 6.
E
Access title edit screen
Press the number key "1". The Title Edit
screen appears.
You can access the title edit screen only
when "PROG. NAVIGATION" is set to
"ON". (
16)
F
Enter programme title
P
ress the number keys and PUSH JOG e
to enter characters, then press OK. For
details, refer to "Entering character" on
page 15.
G
Return to normal screen
Press " as many times as necessary. If there are still some
programmes remaining, go on to step 8.
H
Return to timer mode
Press #.
When programme overlap each other
If "PROGRAM OVERLAPPED" appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
Example: Programme 1 (you have just made) and Programme 4
overlap each other.
A
Overlapping programmes blink on the TV screen.
B
Press PUSH JOG rt, then press OK or PUSH JOG e.
NOTE:
If you do not mind this overlap, press PROG to finish the timer
programme setting. The programme with the lower programme
number will be recorded and the other one will not be recorded
correctly. If no changes are made for approximately 1 minute, the
recorder will return to the normal screen.
C
To cancel a programme, press & when the Programme screen you
do not want is shown. "PROGRAM COMPLETED" appears on the
[1] : TITLE
TV screen for about 5 seconds, then the normal screen appears.
To change a programme, press the appropriate button: START +/–,
STOP+/–, DATE+/–, PR +/–, DAILY, WEEKLY and/or p when
the Programme screen on which you want to make changes is
shown, then press OK. "PROGRAM COMPLETED" appears on the
TV screen for about 5 seconds, then the normal screen appears.
– P1 –
NOTE:
If the overlap is not yet solved, or another overlap occurs with the
24.12
8:00 PR.3
timer programme setting after making the last correction on a
[0-9] : SELECT LETTERS
programme, the conflicting programmes will be shown on the
[&] : DELETE
Programme Check screen again. Repeat the above steps again
[Y/U] : CURSOR
: OK
[
] : EXIT
until the overlap is solved.
– P1 –
Automatic Satellite Program Recording
24.12
W
This facility allows you to automatically record a satellite program
which is timer-programmed on your external satellite receiver.
[0-9] : SELECT LETTERS
[&] : DELETE
Connect a satellite receiver to the recorder's rear AUDIO/VIDEO
[Y/U] : CURSOR
: OK
[
] : EXIT
IN connectors and program the timer on the satellite receiver; the
recorder starts recording when the signals input from the satellite
receiver to the rear AUDIO/VIDEO IN connectors, and when there
is no input signals the recorder stops recording and the power
shuts off.
A
Press p to set the tape speed.
B
Press and hold REC LINK for about 2 seconds. The REC LINK
indicator lights up and the recorder turns off automatically.
— 13 —
PR START
1
PROGRAM OVERLAPPED
2
3
4
5
6
7
8
Confirm the overlapping programmes
Select the programme to modify
You can only select one of the overlapping programmes.
Cancel or change programme setting
Before performing the following steps:
Program the timer on the satellite receiver.
Insert a cassette with the safety tab in place.
Set tape speed
Engage Auto Satellite Prog Rec mode
To disengage the Auto Satellite Prog Rec mode, press REC LINK.
If the recorder's power is off, it is not possible to engage the
Auto Satellite Prog Rec mode.
STOP
CH
DATE
8:00
10:00
3
24.04
10:00
10:45
2
25.04
11:30
13:00
1
25.04
9:00
10:00
92
DAILY
[PROG] : EXIT
Advertisement
Table of Contents
