GENLOCK Menu
This menu is used to set the camera cable length to the length actually used.
(A Page 12 [Adjustments for Genlock Operation])
* Default values are indicated in bold characters.
No.
Item
1A SD H PHASE
1
*
1B HD H PHASE
1C SC COARSE
1
*
1D SC FINE
1
*
1Z
BACK
*1 This function is unavailable when connected to GY-HM790 series.
Memo :
● Either
[1A: SD H PHASE]
CABLE Menu
This menu sets the camera cable length according to the actual length used.
(A Page 12 [Camera Cable Length Setup])
* Default values are indicated in bold characters.
No.
Item
2A LENGTH
2Z
BACK
Setting Values
-128 to 0 to 127
Adjustment of the Horizontal sync phase of genlocking.
-1024 to 0 to 1023 Adjustment of the Horizontal sync phase of genlocking.
0 ,
Coarse adjustment of the color phase of genlocking. Use a vectorscope, etc.
90 , 180 , 270
-128 to 0 to 127
Fine adjustment of the color phase, which should be performed after completing the
[SC COARSE] adjustment.
If the subcarrier cannot be adjusted with [SC FINE], restart the adjustment from
[SC COARSE].
^
Return to the previous display.
or
will appear depending on the Video Format of the camera.
[1B: HD H PHASE]
Setting Values
5M,
Set according to the total length of the camera cables in use.
20M,
50M, 100M
^
Return to the previous display.
Function
Function