Set Lock Code - JVC 1299-TN-JII-JMT User Manual

20 V-Chip
Accessing V-Chip Information:
To access Rating information about a certain
program, press the V-C
that program. A display like this will appear:
PROGRAM IS RATED :
If you decide you want to block this category of
viewing, press "0" while the above screen is
visible, and all programs from that category will
be blocked.
Example 1:
If you want to set your V-Chip settings to block
all programming above TV PG:
Press Z
ERO
displayed
TV
MA
V/FV
S
L
D
All Programming above TV PG will be
blocked.
Example 2:
If you want to set your V-Chip settings to block
all programming above a current setting such
as TV PG-V (with violence):
Press Z
ERO
TV
MA
— — — — — —
V/FV
S — — —
L — — —
D
All Programming above TV PG with
Violence will be blocked.
NOTES:
• After a power interruption you must reset the Lock Code.
• Write your Lock Code number down and keep it hidden from potential viewers.
• If you forget the Lock Code, a new code may be set using the steps listed above.
button while viewing
HIP
TV-PG - V
when TV-PG is
TV TV TV TV TV
14 PG G Y7 Y
— — —
—
when TV-PG - V is displayed
TV TV TV TV TV
14 PG G Y7 Y
—
— —
• For Children's programming you can block
TV-Y and Y programs by Pressing "0" when Y is
displayed during a program. Programming for
audiences other than children's audiences will
not be affected.

Set Lock Code

Channel Guard and V-Chip settings are protected
by a four-digit Lock Code. Your TV comes pre-set
with a Lock Code of "0000". You may change the
code to any four-digit number you wish. To
change the Lock Code, follow the steps below.
P ress the M
E N U
To SET LOCK CODE
To operate
The padlock icon appears
Press Z to access the Lock Code
ERO
LOCK CODE
FINISH
The first digit will be highlighted
To select the number
To move to the next digit
Continue to follow these directions for all
four numbers
To Finish
To save your settings and return to the
Initial Setup menu
E when finished
XIT
b u t t o n
0 0 0 0
0