Table of Contents
Advertisement
n
Setting a Balance ID
When managing multiple balances, by setting a four-digit management number (ID) and turning
the GLP output function ON, you can add the balance ID to calibration records
and weight reading outputs.
1
Press
twice in the weighing
mode.
This opens the main menu.
2
Select setting of a balance ID.
[TOOLS]
[BAL. I D]
3
Enter the required numerals (max.
4 digits).
(Enter the ID.)
^ "Entering Numerical Values", page 43
The default ID is "0000".
4
Return to the weighing mode.
or
[SYSTEM]
[SET]
(^ page 67)
! ! B ! A ! L . I ! D
! ! B ! A ! L . I ! D
! ! ! 0 ! 0 ! 0 ! 0
! ! ! 0 ! 0 ! 0 ! 0
! ! S ! E ! T ! !
! ! S ! E ! T ! !
! ! B ! A ! L . I ! D
! ! B ! A ! L . I ! D
137
- Quick Links:
- Calibration
- Before Starting Calibration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the ATX224 and is the answer not in the manual?
Questions and answers
RS232 setting in ATX234
To set the RS-232 configuration in the Shimadzu ATX224, follow these steps:
1. Ensure you have the optional RS-232C Interface IFB-103A-UNC (P/N 321-41167-20) and RS-232 Cable (P/N 321-60754-01).
2. Use a correctly connected cable with the appropriate pin configuration:
- RXD (Balance Side) → TXD (PC Side)
- TXD (Balance Side) → RXD (PC Side)
- DTR (Balance Side) → DSR (PC Side)
- SG (Balance Side) → SG (PC Side)
- DSR (Balance Side) → DTR (PC Side)
- RTS (Balance Side) → CTS (PC Side)
- CTS (Balance Side) → RTS (PC Side)
3. Choose the data format based on the user settings:
- Standard setting 1 (MODE1)
- Data format 2 (DF.2)
4. For WindowsDirect communication, refer to the "WindowsDirect Communication Function" section in the manual.
This setup enables communication between the balance and a PC via RS-232C.
This answer is automatically generated