Related Manuals for MBM 93M
Summary of Contents for MBM 93M
- Page 1 Authorized Dealer Canada BUY the 93M PAPER AND LETTER FOLDER - Click Here Paper Folder...
- Page 2 Authorized Dealer Canada Safety Precautions Please read these operating instructions before putting the machine into operation and observe the safety precautions. Children must not operate the machine! Do not touch or insert foreign objects into any rotating part during operation.
- Page 3 Authorized Dealer Canada Safety Precautions Keep long hair clear of machine! Take care of ties and other loose pieces of clothing! Remove any paper clips!
- Page 4 Authorized Dealer Canada Installation Connect the power cord to a single phase socket . 120V/4A Insert the 1st fold plate(long plate) into the studs (A) and (B) and lock into position. When the 2nd fold plate(short plate) put in Please see clearly the labels at both ends as shown.
- Page 5 Authorized Dealer Canada Installation When 2nd fold plate put in Please see clearly the labels at both ends as shown. Put the label indicator: only single fold into the machine as shown .Only of single fold. Check that the 2nd fold plate is in the correct position.
- Page 6 Authorized Dealer Canada Installation Setting the paper size and folding position. Open the paper guides by loosening the 2 screws and push towards the sides. Move the paper guides to the edge of the paper. Tighten the screws. Press down the paper guide and insert paper as far as possible.
- Page 7 Authorized Dealer Canada Installation Paper Ready: Fan the paper stack. Do not fold curly paper. Do not fold wet paper. Do not fold paper with clips or staples.
- Page 8 Authorized Dealer Canada Installation This machine has four folding patterns,(LT LG). Classified as: 1. Letter fold 2. Zigzag fold 3. Double Fold 4. Single Fold Adjust stopper plate on the 1st fold plate: 1st fold plate stopper plate ck that the paper has been folded correctly and if necessary adjust the stopper plate on the 1st fold plate and/or 2nd fold plate.
- Page 9 Authorized Dealer Canada Installation Adjust 2nd fold plate: Turn the 2nd fold plate 180 degrees (script is in reversed position) and put back into the machine. 2nd fold plate Instruction Label: Setting the paper delivery roller according to folding patterns.
- Page 10 Authorized Dealer Canada Operation Guide Switch on the main switch. Press the START key paper will be folded. Examples of folds on page 15~17...
- Page 11 Authorized Dealer Canada Operation Guide If number of folding paper setting is required, press increase button. Press once, each for 10 sheets up. Counter returns to “0” when pressing the “C” button. Disconnect from the main socket if not used for a longer period.
- Page 12 Authorized Dealer Canada Troubleshooting The machine cover must be closed. Mount the 1st fold plate according to instruction. See “Installation”.
- Page 13 Authorized Dealer Canada Troubleshooting Fix the fold plate tightly (the hook of the fold plate click on the supportive). Clear the Jammed paper/refill the paper feeder. Remove both fold plates and any paper debris. Open the roller cover. Remove paper debris from the machine.
- Page 14 Authorized Dealer Canada Troubleshooting Press the “C” button to clear up the malfunctions. Switch off the machine and wait 1min before switching on again. If this does not clear the "OVERLOAD" message, then open top cover located at the feed roller - follow instructions on label under bottom of cover...
- Page 15 Authorized Dealer Canada Troubleshooting Remove both fold plates and any paper debris. Clear the jammed paper.
- Page 16 Authorized Dealer Canada Adjustment Adjust stopper plate position Letter Fold Deviations of stopper plate from label indicator A. too long A. too short B. too long B. too short A B C not up to standard 1.First adjust A side to standard, use label indicator as basic benchmark.
- Page 17 Authorized Dealer Canada Adjustment Adjust stopper plate position Zigzag Fold Deviations of stopper plate from label indicator A. too long A. too short B. too long B. too short A B C not up to standard 1.First adjust C side to standard, use label indicator as basic benchmark.
- Page 18 Authorized Dealer Canada Adjustment Adjust stopper plate position Single Fold Deviations of stopper plate from label indicator A. too long A. too short A. too long A. too short Double Fold B. too long B. too short not up to standard A B C 1.First adjust the 1st fold plate according to...
- Page 19 Authorized Dealer Canada Adjustment Wipe the rubber folding roller, Wipe the surface on the feeding rollers with MBM roller cleaner. Wipe the rubber folding roller.
- Page 20 Authorized Dealer Canada Replacement Paper roller and separator, belongs to replaceable consumables. Remove the paper feed roller. Remove the folding roller. Remove the separator with a sharp edged tool and replace them.
Need help?
Do you have a question about the 93M and is the answer not in the manual?
Questions and answers