Cisco TelePresence Administrator's Manual page 415

Reference material
ID Title
40034 Security alert
40036 Delegated
credential
checking error
40037 Delegated
credential
checking error
40038 Delegated
credential
checking
configuration
error
40039 Delegated
credential
checking
configuration
error
40040 Unified
Communications
configuration
error
40041 Security alert
40042 FIPS140-2
compliance
restriction
40043 Unified
Communications
configuration
error
40044 System reset
required
40045 Restart required
Cisco VCS Administrator Guide (X8.1.1)
Description
Firewall rules activation failed; the
firewall configuration contains rules
with duplicated priorities
The traversal server zone
associated with SIP domain
<domain> cannot connect to the
traversal client system
There is a communication problem
with the traversal client zone
<zone> used to receive delegated
credential checking requests
TLS verify mode is not enabled on
the traversal server zone associated
with SIP domain <domain>
TLS verify mode is not enabled on
the traversal client zone (<zone>)
that has been configured to accept
delegated authentication requests
TLS verify mode is not enabled on a
traversal zone configured for Unified
Communications services
Automated intrusion protection rules
are not available
Some SIP configuration is not using
TLS transport; FIPS140-2
compliance requires TLS
Media encryption is not enforced on
a traversal zone configured for
Unified Communications services
FIPS140-2 mode has been enabled;
a system reset is required to
complete this process
FIPS140-2 mode has been
disabled; a system restart is
required to complete this process
Solution
Check your firewall rules
configuration, ensure all rules have a
unique priority and re-try the
activation
Check that the domain and its
associated traversal server zone are
configured correctly. You may also
need to check the remote traversal
client system
Check that the traversal client zone is
configured correctly. You may also
need to check the remote traversal
server system
Check the domain and ensure that
TLS verify mode is enabled on the
associated traversal server zone
Ensure that TLS verify mode is
enabled on the traversal client zone
Ensure that TLS verify mode is
enabled on the traversal zone; you
may also need to check the remote
traversal system
Disable and then re-enable the
failed services
Ensure that TLS is the only enabled
system-wide SIP transport mode on
the SIP page, and that all zones are
using TLS. Alternatively, if you are
transitioning into FIPS140-2 you may
want to restore a FIPS-compliant
backup of your data.
Ensure that media encryption is set
to 'Force encrypted' on the traversal
zone
Ensure that all alarms are cleared,
then take a system backup before
performing a system reset
Restart the system
Alarms
Severity
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Warning
Page 415 of 507