Steinbach Speedclean Comfort 75 Owner's Manual
Steinbach speedclean comfort pool filter system
Hide thumbs
Also See for Speedclean Comfort 75:
- Manual (35 pages) ,
- Assembly instructions manual (13 pages)
Related Manuals for Steinbach Speedclean Comfort 75
Summary of Contents for Steinbach Speedclean Comfort 75
- Page 1 Speedclean Comfort 75 / Speedclean Comfort 50 Owner’s Manual Pool Filter System Speedclean Comfort 75 Art. Nr. 00-40100 Speedclean Comfort 50 Art. Nr. 00-40200 2011_V1 page 1 of 21...
- Page 2 Speedclean Comfort 75 / Speedclean Comfort 50 Basic safety precautions should always be followed, including the following: Failure to follow instructions can cause severe and/or fatal injury. In this manual, the callout boxes, CAUTION, IMPORTANT and ADVICE have the following meanings:...
-
Page 3: Table Of Contents
Speedclean Comfort 75 / Speedclean Comfort 50 Table of Contents: Safety Warnings ............................4 General Information ............................5 How Sand Filtration Works ........................5 Powering The Filter Pump ........................5 Changing Valve Positions ........................5 ... -
Page 4: Safety Warnings
Speedclean Comfort 75 / Speedclean Comfort 50 1 Safety Warnings Read all Warnings and Cautions noted blow. Failure to do so could result in serious or fatal injury. Prior to installation of this unit, carefully read and adhere to all CAUTION, ATTENTION, and ADVICE notices located throughout this manual. -
Page 5: General Information
Speedclean Comfort 75 / Speedclean Comfort 50 2 General Information This manual provides information relating to the installation, utilization and maintenance of our filtration system. We recommend that you read this manual in its entirety and keep it for future reference. -
Page 6: Filtersand Sand & Initial Preparation
Speedclean Comfort 75 / Speedclean Comfort 50 Filtersand Sand & Initial Preparation The filter system you have purchased requires a specific type of sand (not included) for optimum operation: namely, No.20 Silica Sand, double burned, with a particle size of 0.4 mm - 0.8 mm. -
Page 7: Technical Specifications
Speedclean Comfort 75 / Speedclean Comfort 50 3 Technical Specifications Speedclean Comfort 50 Speedclean Comfort 75 Flow Volume (Q) 6,6 m³/h – 0,4 bar 8 m³/h – 0,4 bar MAX Operating Pressure 1,5 bar 1,5 bar Filtration Area 0,13 m²... -
Page 8: Parts List/Reference
Speedclean Comfort 75 / Speedclean Comfort 50 4 Parts List/Reference Before staring installation, check to make sure all parts are present in package. Primary Components BASE PLATE (1) WATER PUMP (1) Art-Nr. 00-40800 Art.Nr. Speedclean Comfort 50 00-40920 Art.Nr. Speedclean Comfort 75 00-40922... -
Page 9: Installation Instructions
Speedclean Comfort 75 / Speedclean Comfort 50 Parts Bag A 1 ¼”-1 ½” HOSE CONNECTOR (2) FLAT GASKET “A” (1) O-RINGS (2)A: 2 ¼ “ Dia, B: 3” Dia HAIR & LINT STRAINER COVER (1) Art.Nr. 00-40911 Parts Bag B SHORT INTEX®... -
Page 10: Tools & Equipment Required
Rubber Mallet Quartz Sand with a particle size of 0.40 - 0.80mm in accordance with DIN EN 12904 (Speedclean Com- fort 50 requires approx. 15 kg, Speedclean Comfort 75 requires approx. 25 kg) A small container of petroleum jelly. -
Page 11: Filter - Pump Assembly Instructions
Speedclean Comfort 75 / Speedclean Comfort 50 Filter – Pump Assembly Instructions 1. Water Pump – Base Plate Assembly a) Secure water pump to the base plate with the provided pump mounting hardware. Orient as shown. 2. Pump Fittings Assembly a) Screw the 1¼”-1½”... - Page 12 FILTERED WATER CHAMBER (see figure). f) Speedclean Comfort 50 requires 15 kg of Quartz Sand with a particle size of 0,4 – 0,8mm. g) Speedclean Comfort 75 requires 25 kg of Quartz Sand with a particle size of 0,4 – 0,8mm. IMPORTANT It is important to ensure that sand does not exceed the recommended quantity/weight and that no sand is permit- ted to enter the filtered water chamber.
-
Page 13: Connecting The Filter System
This pool filter system is designed to connect to pools with standard 1¼ or 1½” diameter hose connectors. The type Speedclean Comfort 75 has a 2 ¼” (Ø 32 mm or 38 mm) hose adapter for Intex® pools (see section entitled “For Pools WITH Threaded Hose Connectors” on page 14). If your pool has a hose connector size and/or type dif- ferent than described here, you may need to purchase an adapter at your local pool supply store or hardware re- tailer. -
Page 14: For Pools With 1¼" Or 1½ "Diameter Unthreaded Hoses
Speedclean Comfort 75 / Speedclean Comfort 50 For Pools with 1¼” or 1½ “Diameter Unthreaded Hoses These instructions assume that the pool is already assembled with hoses attached to the water intake and return ports on the pool. 1) Adapter installation a) Screw the 1¼”-1½”... - Page 15 Speedclean Comfort 75 / Speedclean Comfort 50 2) Pool “Skimmer Hose” Attachment Attach the pool skimmer hose (outlet of pool) to the short INTEX® adapter. Ensure that the flat gasket “B” is installed between the short adapter and the face of the hose before securing 3) LONG INTEX®...
-
Page 16: Filter Operations
Speedclean Comfort 75 / Speedclean Comfort 50 7 Filter Operations Before moving on to the Startup Section, please make yourself familiar with your new filtering system’s valve set- tings and functions. Setting Valve Diagram Complete Water Flow/Function Function: Vacuum, regular pool filter action. This is the setting the filter will be set to most of the time. - Page 17 Speedclean Comfort 75 / Speedclean Comfort 50 Setting Valve Diagram Complete Water Flow/Function Function: Cleaning the hair and lint strainer. This position stops the flow of water into the pump and filter. CAUTION: Do not run pump with valve in this Closed position.
-
Page 18: Operation Of 7 Position Multi-Port Valve
Speedclean Comfort 75 / Speedclean Comfort 50 Operation of 7 Position Multi-Port Valve The 7 Position Multi-Port Valve is designed to give the required flow rate for each action that is described above. Always make sure the power source to the filter is unplugged before changing valve positions. -
Page 19: Maintenance
Speedclean Comfort 75 / Speedclean Comfort 50 CAUTION It is important that you read and follow the instructions on proper power supply sources (see page 11). Reconnect to power source. Allow filter to run for 60 seconds to remove any remaining residue from pump and valve. -
Page 20: To Clean The Hair And Lint Filter On The Motor/Pump Assembly
Speedclean Comfort 75 / Speedclean Comfort 50 To Clean the Hair and Lint Filter on the Motor/Pump Assembly 1) Unplug the pump from the power source. 2) Close the shutoff valves or block the water flow at the pool inlet port (Skimmer). -
Page 21: Troubleshooting
Speedclean Comfort 75 / Speedclean Comfort 50 9 Troubleshooting Malfunction Cause Solution Pressure gauge has reading Dirty filter bed Backwash the filter (position 4) over 1 bar Pressure is too low Hair and lint strainer basket is dirty; Clean the hair and lint strainer;... - Page 22 Speedclean Comfort 50...
- Page 23 Speedclean Comfort 75...
- Page 24 Wir senden Ihnen diese gerne kostenlos zu. Dear customer! Instructions in your language are available at www.steinbach.at/manual. In case you do not have internet access, please write us to request the instructions. We will be happy to send you a copy without additional cost.
Need help?
Do you have a question about the Speedclean Comfort 75 and is the answer not in the manual?
Questions and answers