Using The Dvd Multi Playback Mode; Activating The Dvd Multi Playback Mode - JVC RX-7042S Instructions Manual

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of the DVD
player.
Connection diagram
AUDIO
SUBWOOFER CENTER RIGHT LEFT
DVD
IN
SURR
R
L
RIGHT LEFT
R
L
DVD player
DVD
A
B
C
D
E
Å To component video output
ı To subwoofer output
Ç To center channel audio output
Î To S-video output
‰ To composite video output
Ï To left/right front channel audio output
Ì To left/right surround channel audio output
Note:
When connecting a DVD player to the component video input
jacks, make the component video input setting (VIDEO IN DVD)
correctly. See page 26 for details.
36
COMPONENT VIDEO
DVD
IN
VIDEO
VIDEO S-VIDEO
DVD
IN
FRONT
F G

Activating the DVD MULTI Playback Mode

DVD MULTI playback mode is the best connection method for
enjoying DVD Audio sounds.
• When a DVD Audio disc is played back, the original high-
quality sounds can be reproduced only using this mode.
1. Press DVD MULTI so that "DVD" appears on the
display.
The MULTI indicator also lights up.
ANALOG MULTI
L C R
LINEAR PCM
SUBWFR LFE
LS RS
Note:
When you select DVD MULTI as the source to play, the Surround
and DSP modes are canceled, and the SURROUND and DSP
buttons do not work.
2. Select the analog discrete output mode on the
DVD player, and start playing a DVD.
• Refer also to the manual supplied with the DVD player.
You can adjust equalization patterns and speaker output levels.
See "Adjusting the equalization patterns" on page 28 for details.
Notes:
• Midnight Mode is not available for DVD MULTI playback mode (see
page 16).
• When using a headphones, you can listen to the front channels (left
and right) only, therefore 3D Headphone (3D H PHONE) mode is
not valid for DVD MULTI playback mode.
SPEAKERS 1
VOLUME