Page 1
LED-TV Chassis : N92A Model : UE32C5*** UE37C5*** UE40C5*** UE46C5*** UE32C4000P* SERVICE Manual TFT-LED TV Contents 1. Precautions 2. Product specifications 3. Disassembly and Reassembly 4. Troubleshooting 5. Exploded View & Part List 6. Wiring Diagram UE40C5*** Refer to the service manual in the GSPN (see the rear cover) for the more information.
(AAA x 2) C4000 : BN59-01014A Power Cord 3903-000525 32" BN63-06542A 37" BN63-06543A 40" BN63-06543A Cover-Bottom 46" BN63-06543A 32" BN63-06542B Samsung Electronics Service center C5*** 32" BN96-12930B 37" BN96-12931B Stand 40" BN96-12931B 46" BN96-12932B C4000 32" BN96-13157A Screw 6003-000133 (for the stand - M4, L6) C5*** : BN68-02656A Owner’s Instructions...
Page 11
2. Product specifications CHANNEL FREQUENCY TABLE 1. OUTPUT FREQUENCY : ANALOG fv:45.75MHz, fs:41.25MHz DIGITAL Fc:44MHz 2. TUNING STEP SIZE : FIRST PLL 250KHz SECOND PLL 62.5KHz OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 72.
Page 12
2. Product specifications OSD CH NO CH NO CH NO CH NO Air-DTV Air-NTSC BAND Cable STD BAND Cable HRC Cable IRC 499.25 ULTRA 498.00 499.25 505.25 ULTRA 504.00 505.25 511.25 ULTRA 510.00 511.25 517.25 ULTRA 516.00 517.25 523.25 ULTRA 522.00 523.25 529.25...
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
PC IP addresses should be the same and only the last part (the host address) should be changed. (e.g. IP Address: 123.456.789.**) 2. Using a LAN cable, connect between the external modem and the PC onto which the Samsung PC Share Manager programme will be installed.
Page 15
The Divx DRM, Multi-audio, embedded caption does not supported. ✎ Samsung PC Share manager should be permitted by the firewall programme on your PC. ✎ When you use Media Play mode through a network connection, According to functions of the provided server: The sorting method may vary.
2. Product specifications Advanced Features Screen Display ¦ Move to the file you desired using the up/down/right/left buttons and then press the ENTERE or � (Play) button. The file is played. ✎ Supports the View Devices and Home in Media Play homepage. Information: Videos /Movie 01.avi...
Page 18
2. Product specifications Advanced Features Playing movie file continuously (Resume Play) If you exit the playing Videos function, it can be played later from the point where it was stopped. 1. Select the movie file you want to play continuously by pressing the ◄...
2. Product specifications Playing the Multiple Files ¦ Playing the selected video/music/photo files Videos 2 files selected /Movie 01.avi Page 1. Press the Yellow button in the file list to select the desired file. 2. Repeat the above operation to select multiple files. Movie 01.avi Movie 02.avi ✎...
Page 20
2. Product specifications Advanced Features Videos/Music/Photos Play Option menu During playing a file, press the button. TOOLS Category Operations Videos Music Photos Title You can move the other file directly. > Repeat Mode You can play movie and music files repeatedly. >...
✎ For more information, visit “www.samsung.com” or contact the Samsung call centre. Mobile devices may Using the Message Function need additional software installation. For details, refer to Using this function, you view call arrivals, SMS messages each device's user’s guide.
Page 22
You can also change the setting (or resetting) of this feature at “AllShare Setup”. Using your Samsung phone to control your TV Simply Warning: Please note that if your device is connected to unsecured or unfamiliar network, unwanted or inappropriate contents might be played.
Page 23
5. Exploded View & Part List 5. Exploded View & Part List 5-1. UE32C5100QW Exploded View R001A CB01 M0014 T0175 P001A PANEL SB05A M0590 SC02A F001A SB04A SP01A SP01A...
Page 24
5. Exploded View & Part List 5-2. UE32C5100QW Parts List Location No. Code No. Description & Specification Q’ty S.A/S.N.A Remark CB01 BN61-04924A BRACKET-AV;LB700 40,PCM,T0.5,BKN-P824, P SP01A BN96-12941E ASSY SPEAKER P;8ohm,4pin,10,L:270 R:490, R001A BN96-12912J ASSY COVER P-REAR;UC6000 32,EUROPE,PCM,C M0014 BN94-03368A ASSY PCB MAIN;UE32C5100QFXXC T0175 BN96-12944A ASSY SPEAKER P;4ohm,4pin,10W,R:170,Enclo...
Page 25
5. Exploded View & Part List UE32C5100QW 5-2-1. Parts List Service Bom (SA: SERVICE AVAILABLE, SNA: SERVICE NOT AVAILABLE) Level Location No. Code No. Description & Specification Q’ty SA/SNA Remark BN90-02528C ASSY COVER FRONT;UC5000 32 F001A BN96-12885B ASSY COVER P-FRONT;UC5100 32,PC(CLR)+PC( ...3 AB326 BN61-04661A...
3. Disassembly and Reassembly 3. Disassembly and Reassembly This section of the service manual describes the disassembly and reassembly procedures for the UE**C5***/UE32C4000PW LED TV. WARNING: This LED TV contains electrostatically sensitive devices. Use caution when handling these components. 3-1. Disassembly and Reassembly Cautions: 1.
Page 33
3. Disassembly and Reassembly Description Picture Description Screws 2. 32"/37" C5*** : Remove the 18 screws of rear-cover. 40"/46" C5*** : Remove the 19 screws of rear-cover. Remove the screws of rear-cover. 32"_37" 6003-000133 6003-001003 40"_46" 3. Lift up the rear-cover. 4.
Page 34
3. Disassembly and Reassembly Description Picture Description Screws 5. Lift up the stand link. Remove the 5 screws of bracket stand link. 6003-00133 6. Remove the 6 screws of main board and 5 screws of IP board. 6001-002283 6001-000115 7. Lift up the panel. Reassembly procedures are in the reverse order of disassembly procedures.
1. Precautions 1. Precautions 1-1. Safety Precautions Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. 1-1-1. Warnings For continued safety, do not attempt to modify the circuit board. Disconnect the AC power and DC power jack before servicing.
1. Precautions 1-2. Servicing Precautions WARNING: An electrolytic capacitor installed with the wrong polarity might explode. Caution: Before servicing units covered by this service manual, read and follow the Safety Precautions section of this manual. Note: If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions, always follow the safety precautions.
1. Precautions 1-4. Installation Precautions For safety reasons, more than a people are required for carrying the product. Keep the power cord away from any heat emitting devices, as a melted covering may cause fire or electric shock. Do not place the product in areas with poor ventilation such as a bookshelf or closet. The increased internal temperature may cause fire.
6. Wiring Diagram 6-3. Connector Functions Connector Functions CN210 IP CNM802 Supply main power and dimming signal from IP board to Main Board. CN1402_FHD/CN1403_HD T-CON CNF1 The LVDS signal transfered from Main Board to Panel. 6-4. Cables LEAD (Main-IP 18P) LVDS (Main - TCON) 32"...
4. Troubleshooting 4. Troubleshooting 4-1. Troubleshooting 4-1-1. Previous check Check the various cable connections first. • Check to see if any cables are damaged or burnt. • Check to see if there is a disconnected or loose cable connection. • Check to see if the cables are connected according to the connection diagram. Check the power input to the Main Board.
Page 44
4. Troubleshooting 4-1-2. No Power The LEDs on the front panel do not work when connecting the power cord. Symptom The SMPS relay does not work when connecting the power cord. The units appears to be dead. The IP relay or the LEDs on the front panel does not work when connecting the power cord if the cables are improperly connected or the Main Board or SMPS is not functioning.
Page 46
4. Troubleshooting 4-1-3. No Video (Analog PC signal) Symptom Audio is normal but no picture is displayed on the screen. Check the PC source Major Check the Arsenal, Check the Chelsea. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 49
4. Troubleshooting 4-1-4. No video (HDMI 1, 2, 3, 4 - Digital signal) Symptom Audio is normal but no picture is displayed on the screen. Check the HDMI source. Major Check the HDMI switch, Check the SX1. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 52
4. Troubleshooting 4-1-5. No Video (Tuner_CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Tuner CVBS source. Major Check the Tuner, Check the SX1. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 55
4. Troubleshooting 4-1-6. No Video (Tuner DTV) Symptom Audio is normal but no picture is displayed on the screen. Check the DTV source. Major Check the Tuner, Check the SX1. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 58
4. Troubleshooting 4-1-7. No Video (Video CVBS) Symptom Audio is normal but no picture is displayed on the screen. Check the Video CVBS source Major Check the SX1. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 61
4. Troubleshooting 4-1-8. No Video (Component) Symptom Audio is normal but no picture is displayed on the screen. Check the Component source Major Check the SX1. checkpoints This may happen when the LVDS cable connecting the Main Board and the Panel is disconnected. Power indicator LED is off.
Page 64
4. Troubleshooting 4-1-9. No Sound Symptom Video is normal but there is no sound.. When the speaker connectors are disconnected or damaged. Major When the sound processing part of the Main Board is not functioning. checkpoints Speaker defect. Check the source and check the connection of sound cable Input the sound source properly.
4. Troubleshooting 4-2. Alignments and Adjustments 4-2-1. General Alignment Instuction Usually, a color LED TV needs only slight touch-up adjustment upon installation. Check the basic characteristics such as height, horizontal and vertical sync. Use the specified test equipment or its equivalent. Correct impedance matching is essential.
4. Troubleshooting 4-3. Factory Mode Adjustments 4-3-1 Entering Factory Mode To enter ‘Service Mode’ Press the remote -control keys in this sequence : - If you do not have Factory remote - control Power OFF INFO MENU MUTE Power On 4-3-2 How to Access Service Mode Using the Customer Remote Turn the power off and set to stand-by mode.
UC6300/UC6400/UC6400H/UC6500/UC6510/UC6530/ Model UC5100 UC6540/UC6550/UC6600/UC6620/UC6630/UC6700/UC6720/ Select Model UC6730/UC6740/UC6800/UC6830/UC6900/UC6900H/ UC8000/ PC420/PC430/PC431/PC432/PC450/PC451/PC480/PC520/ PC530/PC531/PC540/PC541/PC550/PC551/PC560/PC580/ PC590/PC670/PC6100/PC6400/PC6500/PC7000/PC7700/ PC8000 EU : DRXKSEMCO DRXKSEMCO/S2Semco/T2CXD/DRXKSEM_E/ AU : TUNER DRXKSEMCO DRXKALPS/DRXKSEN_2/DRXKXG DRXKALPS satellite : S2Semco SAMSUNG / SAMSUNG SAMSUNG Etron Select Design NONE/W-MILKY/T-M-Brn/T-W-Brn/T-W-Gray/W-D-Gray/W-M- Front Color for Illuminance Whit/W-Violet/T-C-Gray/T-R-BLK/S-BLK/S-RBLK/S-C-Gray/ Sensor 4-27...
Page 70
4. Troubleshooting Control Factory Name Data Range Control EDID Sub Option Shop Option Sound Factory Name Data EDID EDID ON/OFF EDID WRITE ALL … EDID WRITE PC … EDID WRITE HDMI … Download EDID data to EEPROM. EDID WRITE HDMI1 …...
Page 71
4. Troubleshooting Factory Name Data Range Hotel Option Hotel Mode SI Vender … Power On … Channel Channel Type … Power On Volume … Min Volume … Max Volume … Panel Button Lock … Power On Source … Factory Name Data Range Shop Option...
Page 72
4. Troubleshooting Factory Name Data Range Test Pattern Panel Auto Setting Panel Display fixed Time Logic Usb D/L Tuner Status Factory Name Data Range Test Pattern OFF/ White/Grey/Black Pattern Sel Red/Green/Blue Test for Input of Scaler. FRC PC Mode …...
Page 73
4. Troubleshooting ISDB-T FFT Size_1 Not modified Guard Interval_1 Not modified Freq. Offset_1 Not modified SNR_1 Not modified IF AGC_1 Not modified TMCC Lock_1 Not modified TS Packet_1 Not modified Master Lock_1 Not modified A_Modulation_1 Not modified A_Code Rate_1 Not modified A_Timer InterLeave_1 Not modified A_Segments Num_1...
Page 74
4. Troubleshooting ADC/WB Factory Name Data Range ADC/WB ADC Target ADC RESULT Factory Name Data Range AV Calibration Success Success / Failure Comp Calibration Success Success / Failure PC Calibration Success Success / Failure HDMI Calibration Success Success / Failure Factory Name Data Range...
4. Troubleshooting 4-4. White Balance 4-4-1. Calibration 1. Calibration AV Calibration Comp Calibration PC Calibration HDMI Calibration 4-4-2. Adjustment (low light) (hight light) Sub Bright Sub Contrast 3. W/B R offset R gain G offset G gain B offset B gain (W/B adjustment Condition refer next page) 4-5.
4-6. Servicing Information 4-6-1 USB Download Method Samsung may offer upgrades for TV’s firmware in the future. Please contact the Samsung call center at 1-800- SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
4. Troubleshooting 4-7. How To Upgrade Sub Micom With Ddc Manager 4-7-1. TV Sub S/W Order Description Connect DDC MANAGER to the TV Set with D-SUB cable. And Power on. (USB type : MTI-2510 / parallel type : MTI-2059) Enter the factory mode. Control - EDID - EDID ON/OFF Select ON.
Page 79
4. Troubleshooting Order Description Push the ‘Program’ Button. (It takes quite a bit of time. You can wait or close the DDC tool by force and open tool and load file again.) Push the ‘Program’ Button again. (It takes about 100 seconds.) If update completes, TV set will booting automatically.
Need help?
Do you have a question about the UE32C5*** and is the answer not in the manual?
Questions and answers