HP 800 User Manual page 248

End-user Access
End-user Access Windows
NOTE:
TIP:
5-42
Automatically connect the user through domain authentication
■
("Agentless Credentials" on page 3-121)
■ Require the user to log in. End-users must set up their local endpoints
to have a Windows administrator account with a password in order
to be tested by NAC 800.
NAC 800 uses the Windows Messenger Service when using agentless testing.
If you have disabled this service (http://www.microsoft.com/windowsxp/
using/security/learnmore/stopspam.mspx), agentless testing will not work.
If the end-user has not defined a login/password combination, the default
login is usually administrator with a blank password.
If the end-users are required to log in, or if the automatic connection methods
fail, they must log in using the following window:
Figure 5-29. End-user Login Credentials
If the Allow end-users to have their administrator login information saved for future
access option is selected on the System Configuration>>Testing methods window,
the end-user login window presents a check box option to the end-users,
allowing them to save their login credentials.
If the login credentials are correct, the Testing window is displayed (see
"Testing Window" on page 5-44).