Hp Procurve Switch - HP 800 User Manual

1. Enter the IP address of the Foundry device in the IP address text field.
Enter a shared secret in the Shared secret text field. The shared secret is
2.
used to encrypt and sign packets between the device and RADIUS server.
Re-enter the shared secret in the Re-enter shared secret text field.
3.
4. Enter an alias for this device that appears in log files in the Short name text
field.
Select Foundry from the Device type drop-down list.
5.
Select telnet or SSH from the Connection method drop-down list.
6.
Enter the User name with which to log into the device's console.
7.
Enter the Password with which to log into the device's console.
8.
9. Re-enter the console password.
10. Enter the password with which to enter enable mode.
11. Re-enter the enable mode password.
12. Enter the Reconnect idle time. This is the amount of time in milliseconds
that a Telnet/SSH console can remain idle or unused before it is reset.
13. Select the Show scripts plus symbol to show the following scripts:
Initialization script – The expect script used to log into the console and
•
enter enable mode.
• Re-authentication script – The expect script used to perform endpoint
re-authentication.
Exit script – The expect script used to exit the console.
•
14. Click ok.
TIP:
Click revert to defaults to restore the default settings.

HP ProCurve Switch

To add an HP ProCurve switch:
Home window>>System configuration>>Quarantining>>802.1X Quarantine
method radio button>>Add an 802.1X device
System Configuration
Quarantining, 802.1X
3-71