Tv Channel Setup & Channel Auto Scan; Initial Tv Setup - Apex Digital LD3249 User Manual

After you have initially connected your TV antenna or cable (no set top box) turn the television ON. A screen will display asking you to run a
Channel Auto Scan to search and receive available local digital channels. It is here where you will select antenna options and run Channel
Auto Scan. Channels will be stored in the TV tuner.
• Press the MENU button on the remote control.
t u arrow buttons, scroll to highlight TV mode.
• Using the
• Press the down
How to Navigate:
. Select AIR when connected
to an indoor/outdoor
antenna.
• Press the t u arrow
button to highlight AIR
• Press the down q arrow
button to select Auto Scan
then press the u right arrow
button to start Channel Auto
Scan.
Channel Auto Scan may
•
take several minutes to
complete.
NOTE: For cable or satellite
users with no TV antenna,
there no need to run Chan-
nel Auto Scan. Connect
your cable or satellite set
top box to one of the avail-
able inputs on the TV for
viewing.
17
q arrow button to highlight AIR/CABLE
Air Mode Cable Mode
Select CABLE if you subscribe
to a pay television service includ-
ing satellite.
• Using the t u arrow button to
highlight CABLE
• Press the q arrow button
to select AUTO SCAN. Press
ENTER and the cursor will move
up and CABLE SYSTEM will be
displayed next.
• Press the u arrow button to
select STD > IRC > HRC > Auto
(Auto is recommended).
• Press the down q arrow button
to select Auto Scan and press
ENTER to start Channel Auto
Scan
Channel Auto Scan may take
•
several minutes to complete.