About Mp3/Wma/Aac File Of Usb Memory; Repeat Play; Random Play); Searching For A Desired Song - Alpine CDA-137EBT Owner's Manual

This unit has a BANK function that automatically divides every 1,000
songs stored in USB Memory into individual banks to make searching
and playing back a song easier. A maximum of 1,000 songs for one bank
can be stored according to the order stored in USB Memory. A maximum
of 20 banks (20,000 songs) can be recognized.
Bank No.
Bank 1
Bank 2
Bank 20

About MP3/WMA/AAC File of USB Memory

1
Press SOURCE/ C to select the USB mode.
2
Press to select the desired track (file).
w or e
Pressing and holding w or e will fast backward/fast forward
track continuously.
3
To pause playback, press j / r .
j / r
Pressing again will resume playback
Note
• Any file protected by DRM (Digital Rights Management) copy protection,
cannot be played back on this unit.
• The playback time may not be correctly displayed when a VBR (Variable
Bit Rate) recorded file is played back.
• If there is tag information, artist name/album name/track name is
displayed.
• If an MP3/WMA/AAC file contains ID3 tag/WMA tag information, the
ID3 tag/WMA tag information is displayed (e.g., song name, artist name,
and album name). All other tag data is ignored.
If text information is not compatible with this unit, the display is blank.
•
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• Press VIEW to switch the display. For details, refer to "Displaying the
Text" on page 16.

Repeat Play

1
Press 4.
The song is played back repeatedly.
When a song is searched by Tag information.
*1 *2
RPT  RPT  RPT 
When a folder/file is searched by (FILE NAME) mode:
*1 *4
RPT  RPT  (o )  RPT
Only a file is repeatedly played back.
*1
According to the artist information of the current song, a playlist
*2
about all the songs with the same artist of the Bank are made into a
playlist, which then starts to play back.
According to the album information of the current song, a playlist
*3
about all the songs with the same album of the Bank are made into
a playlist, which then starts to play back.
Only files in a folder are repeatedly played back.
*4
2
To cancel repeat play, select (off) with the above procedure.
Note
• During repeat play, setting M.I.X. to ON will cancel the repeat play.
28
-EN
Song number
1~1,000
1,000~2,000
19,001~20,000
*3
 (o )  RPT
M.I.X.(Random Play)
1
Press 5 .
The songs are played back in random sequence.
When a song is searched by Tag information.
*1 *2
MIX  MIX ALL  (o )  MIX
When a folder/file is searched by (FILE NAME) mode:
*3 *4
MIX  MIX ALL  (o )  MIX
Song shuffle randomly plays back songs within a selected category
*1
(playlist, album, etc.). The songs within the category are played just
once until all songs have been played.
All songs in the current Bank are played back in random sequence.
*2
Any one song does not play back again until all songs have been
played back.
All songs in the current folder are played back in random sequence.
*3
Any one song does not play back again until all songs have been
played back.
All songs in the USB Memory are played back in random sequence.
*4
Any one song does not play back again until all songs have been
played back.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
When a song is played back during Random (M.I.X.) play in the USB
•
mode, the song can be played back again randomly even if not all
songs in the current Bank have been played back.
• During M.I.X. play, setting repeat play to ON will cancel the M.I.X.
play.
• During repeat play, etc., the track number display for M.I.X. play
may be incorrect.

Searching for a desired Song

You can select to search a song by Tag information or (FILE NAME)
mode. Before you search a song, select your desired search mode in
"Setting the USB Search Mode" (refer to "Setting the USB Search Mode"
on page 20).

Searching by Tag information

Before performing the following procedures, make sure Tag is selected in
"Setting the USB Search Mode" (refer to "Setting the USB Search Mode"
on page 20).
A USB Memory Device can contain hundreds of songs. By using file tag
information and keeping these songs organized in playlists, this unit's
search functions will ease song searches.
Each music category has its own individual hierarchy. Use the Bank*1/
Playlists/Artists/Albums/Songs/Genres/Composers/Folders/Files search
mode to narrow searches based on the table below.
Hierarchy Hierarchy Hierarchy
1 2
*1
Bank Playlist
*1 *
Bank Artist
*1 *
Bank Album
*1 *
Bank Song
*1 *
Bank Genre
*1 *
Bank Composer
*1
Bank Folder
*1
Bank File
Hierarchy Hierarchy
3 4
Song -
*
Album Song
Song -
- -
* *
Artist Album Song
*
Album Song
File -
- -
5
-
-
-
-
-
-
-