JVC GVT0276-012A Operating Manual

Listening to a Disc/USB Device
To insert a disc To select a title/group
While playing...
(While holding)
To select a chapter/track/file
• When using an 8 cm disc, place it on the inner circle
While playing...
of the disc tray.
To close the disc tray, press 0 again.
To prohibit disc ejection (Child Lock)
When the System is turned on and the disc tray is
closed, press 0 while touching 7 (on the main unit). • When you press 4 for the first time, you go back to the
To cancel the prohibition, repeat the same procedure. beginning of the current chapter/track/ file.
"UNLOCKED" appears on the display.
To locate a particular portion
To connect a USB device
• This does not function for JPEG files.
USB cable (not supplied)
For DVD/CD and USB1
While playing...
For USB2
The illustration above is for NX-D7. Press 4 / ¢ while playing. The search speed changes
Playing back a Disc/USB Device only in two steps.
To return to normal playback, press 3.
• For NX-D7, you can play back only music files on
the USB 2 terminal. To locate an item directly
• To select a title/group
To start
To pause To stop
(While holding)
• To select a chapter/track/file
Press a chapter/track/file number using the number buttons.
To search for a track/group by name (for USB2)
1
Resume Play (for DVD/CD or USB1)
The System can store the stop point, and when you
start playback again by pressing 3, DVD/CD 6
or USB 1 6 (even while on standby), it starts from
(While holding)
the position where you have stopped—Resume Play.
TR SEARCH ? Search for a track by title.
To stop completely while Resume is activated,
press 7 twice.
GR SEARCH ? Search for a group by title.
To select the file type (for DVD/CD or USB1)
2 Enter the title using the number buttons.
If different types of playable files (audio/still picture/
• To enter the title, see "Editing Operations. "
moving picture) are recorded, select a file type to play.
• You can enter up to 5 characters of the title.
While playback is stopped... 3 Press ENTER/SET to start the Title Search.
When a track or group is found, playback starts.
17
On-screen Operations
Operating the On-screen Bar Control Screen Operations
You can search for and play the desired items through the
1 Display the entire on-screen bar while playing.
control screen.
Ex: While "DVD/CD" is selected as the source...
For DVD-VR
Ex.: When Original Program is selected.
disappears
2 Select (highlight) the function using the cursor
buttons then press ENTER/SET.
Function icons
Time indications: Press repeatedly ENTER/SET
TIME
to change the timer indication.
TIME: Elapsed playing time of the current Ex.: When Play List is selected.
chapter/track (not applicable for DVD-VR).
REM: Remaining time of the current chapter/
track (not applicable for DVD-VR).
TOTAL: Elapsed disc time.
T. REM: Remaining time of title (DVD Video)/
original program (DVD-VR)/disc (SVCD/
VCD).
Repeat Mode: Select the desired option in the
OFF
pop-up window using the cursor buttons then
1 Listed number 5 Title
press ENTER/SET.
2 Recording/creating date 6 Highlight bar
A-B: Repeats a desired portion.
1 Press ENTER/SET at the start point during 3 Recording channels 7 Chapters included
play. 4 Recording time 8 Playback time
2 Press ENTER/SET at the end point during
For MP3/WMA/WAV/JPEG/MPEG-1/MPEG-2/ASF/DivX files
play.
Ex: While playing an MP3 file on a disc.
A-B repeat starts.
TITLE: Repeats the current title.
ALL: Repeats the disc (not applicable for DVD) or
programmed tracks.
CHAPTER: Repeats the current chapter.
TRACK: Repeats the current track.
OFF: Cancels Repeat Mode.
Time search (hours/minutes/seconds): Enter the
time in the pop-up window using the number
buttons then press ENTER/SET.
• Always enter the hour digit (even "0" hours),
• To correct a mis-entry, press 2 to erase the last
entry.
1 Current source 8 Repeat Play setting
Chapter search: Enter the chapter number in the
CHAP.
2 Current group number/ 9 Elapsed playing time of the
pop-up window using the number buttons then
total group number current file (not applicable
press ENTER/SET.
3 Current group
for JPEG files)
• To correct a mis-entry, press the number
4 Group list p Operation status icon
buttons until the desired number is shown in
5 File information (only for q Current file number/
the pop-up window.
MP3/WMA/WAV files) total number of files in
Audio language or channel, Subtitle language, 6 Current file
1/3 the current group (total
View angle: Select the desired option in the pop- 7 Random Play/Program
number of files)
1/3
up window using the cursor buttons then press
Play setting (for "DVD/ w Highlight bar (current
1/3
ENTER/SET.
CD") selection)
e File list
To clear the on-screen bar, press ON SCREEN again.
19
Program Play/Random Play/Group Play A-B Repeat
• Program Play/Random Play cannot be used for "USB1, " You can play back a desired portion repeatedly.
DVD-VR and JPEG/MPEG-1/MPEG-2/ASF/DivX files on
a disc, and some DVDs.
Ex: For USB2
(While holding)
(for USB2 only)
Repeat the procedure to select the start point (A), then the
Canceled
end point (B) during playback.
(for USB2 only)
• To cancel A-B repeat, press the same button again.
To exit Program Play or Random Play, press PLAY MODE
repeatedly until PRGM, RND, and GR indicator are all off Unique Video Disc/File Operations
before or after playback.
The operations will vary depending on the discs or files.
To select the audio track
PROGRAM—To program the playing order.
• You can arrange the playing order of the chapters/tracks/
files (up to 99) before you start playback.
You can select the language or the audio channel to listen to.
• Resume does not work for Program Play.
For DVD/CD:
To select the subtitle language
1 Press PLAY MODE repeatedly to select PROGRAM.
2 Select chapters/tracks/files you want for Program Play
using the number buttons.
You can select or turn on/off the subtitle language to display
• For DVD Video and MP3/WMA/WAV files:
on the TV.
Select a title or group number, then select a chapter
or track/file number. To select the view angle
3 Repeat step 2 until you complete your program.
4 Start playback.
For USB2:
1 Select chapters/tracks/files you want for Program Play
(While holding)
using the number buttons and press ENTER/SET.
You can view the same scene from different angles.
2 Repeat step 1 until you complete your program.
To play back still picture
3 Press PLAY MODE repeatedly to select PROGRAM.
Press 8 while playing.
4 Start playback.
To play back frame by frame
RANDOM—To play all the tracks/chapters at random.
Number buttons
Press 8 while displaying the still picture.
GROUP RNDM (Group Random) (for USB2 only)—To play
To play back slow-motion
all tracks in a group at random.
Press 8 to display the still picture, then press 1* or ¡ to
GROUP (for USB2 only)—To play only tracks in the
select slow-motion speed.
specified group.
* Reverse slow motion is only available for DVD Video.
Playing Repeatedly
To replay the previous scenes (One-Touch Replay)
Press REPEAT repeatedly to select Repeat Mode.
While playing...
• Repeat Mode varies depending on the medias or the files.
REPEAT CHAP Repeats the current chapter. The playback position moves back about 10 seconds before
Repeats the current title. the current position (only within the same title for DVD
REPEAT TITL
Video).
REPEAT TRK Repeats the current track/file.
Zoom
REPEAT GRP Repeats the current group.
REPEAT PG Repeats the current original program.
REPEAT PL Repeats the current Play List.
REPEAT ALL Repeats all the contents or programmed
Press ZOOM repeatedly to select the magnification of the
tracks/files.
zoom. You can move the zoomed-in position using the cursor
buttons.
REPEAT OFF Canceled.
GVT0276-012A
18
Setup Menu
You can change the settings of the System. • PICTURE SOURCE—To select "AUTO, " "FILM" or
• The Setup Menu can be used only when "DVD/CD" or "VIDEO" to obtain optimal picture quality
"USB1" is selected as the source. • SCREEN SAVER—To activate or deactivate Screen Saver.
1 When playback is stopped, press SET UP while • FILE TYPE—To select "AUDIO", "STILL PICTURE" or
"VIDEO" as the file type on the disc and "USB1. "
holding SHIFT to display the Set up Menu.
• HDMI DVI COLOR*
2 Select the menu and item using the cursor
("STANDARD" or "ENHANCE") for TV with HDMI
buttons.
connection.
3 Press ENTER/SET. • HDMI OUT*
("AUTO" or "RGB") from the HDMI MONITOR OUT
4 Select the options using the cursor buttons, then
terminal.
press ENTER/SET.
AUDIO
To clear the Setup Menu, press SET UP (while holding
SHIFT).
• DIGITAL AUDIO OUTPUT—To set correctly according
to the connected digital audio equipment ("PCM ONLY",
Menus and items
"DOLBY DIGITAL/PCM" or "STREAM/PCM")
• DOWN MIX—To select the signal suitable to the device
LANGUAGE
connected to the OPTICAL DIGITAL OUTPUT terminals
• MENU LANGUAGE—To select initial menu language for
("DOLBY SURROUND" or "STEREO"). This function
DVD Video.
is available when "DIGITAL AUDIO OUTPUT" is set to
• AUDIO LANGUAGE—To select initial audio language for
"PCM ONLY. "
DVD Video.
• D.RANGE COMPRESSION—To enjoy powerful sound
• SUBTITLE—To select initial subtitle language for DVD
even at a low volume level while playing Dolby Digital
Video or select "OFF. "
software ("AUTO" or "ON")
• ON SCREEN LANGUAGE—To select "ENGLISH, "
• HDMI AUDIO OUT*
"CHINESE" or "SPANISH" as the on-screen language.
signal from the HDMI MONITOR OUT terminal.
PICTURE
OTHERS
• MONITOR TYPE—To select the monitor type to match
• RESUME—To activate or deactivate Resume.
your TV ("16:9 NORMAL, "
16:9 4:3 LB
• ON SCREEN GUIDE—To activate or deactivate the on-
"16:9 AUTO, " "4:3 LB, "
screen guide.
"4:3 PS, " "16:9 MULTI
• CEC* 1
NORMAL, " "16:9 MULTI
"Preparations" in "Starting up").
4:3 PS
AUTO, " "4:3 MULTI LB, " or
• DivX REGISTRATION—To confirm the Registration
"4:3 MULTI PS").
Code.
* 1 Only for NX-D7/NX-D5
Optical Digital Out Signals
DIGITAL AUDIO OUTPUT
Playback disc/file STREAM/PCM
48 kHz, 16 bit Linear PCM*
DVD Video with 48 kHz, 16/20/24 bit Linear PCM
DVD Video with 96 kHz, Linear PCM 48 kHz, 16 bit Linear PCM
DVD Video with Dolby Digital Dolby Digital bitstream
DVD Video with DTS DTS bitstream 48 kHz, 16 bit Linear PCM
DVD-R/-RW in DVD-VR format with 48 kHz,
48 kHz, 16 bit Linear PCM*
16/20/24 bit Linear PCM
Dolby Digital bitstream
DVD-R/-RW in DVD-VR format with Dolby Digital
SVCD/VCD/CD 44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM
CD with DTS DTS bitstream 44.1 kHz, 16 bit Linear PCM
MP3/WMA/WAV/MPEG-1/MPEG-2/ASF 32/44.1/48 kHz, 16 bit Linear PCM
DivX with MP2, MP3 32/44.1/48 kHz, 16 bit Linear PCM
DivX with Dolby Digital Dolby Digital bitstream
* 2 While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL
DIGITAL OUTPUT terminal if the discs are not copy-protected.
20
Timer Operations
Setting the Clock
Without setting the built-in clock, you cannot use Daily Timer or Recording Timer (for NX-D7).
1 While holding SHIFT, press CLOCK/TIMER.
• If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see
below).
2 Adjust the hour, then the minute using the cursor buttons, press ENTER/SET.
• To exit the clock settings, press CLOCK/TIMER (while holding SHIFT) as required.
• To return to the previous step, press CANCEL (while holding SHIFT).
Daily Timer
DAILY1 = ON (Time)
Canceled
(While holding)
Setting the Daily Timer
1 Select DAILY (1 – 3) time setting mode (ON)
2 Set the timer as you like.
Repeat the procedure for the following settings until
finished.
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
3 Select the playback source—"TUNER AM, " "TAPE"
(NX-DC3), "DISC, " "USB1, " "USB2" (NX-D7),
"AUDIO IN, " or "TUNER FM, " .
4 For "TUNER AM" or "TUNER FM": Select a preset
channel.
For "DISC": Select the title/group number, then the
chapter/track/file number*.
For "USB1/2": Select the group number, then the
track/file number*.
5 Select the volume level ("MIN" to "MAX" and "– –").
If you select "– –, " the volume is set to the same level
as when the System was last turned off.
Once settings are completed, the timer setting
information appears in sequence.
3 Turn off the System (on standby), if you have set
the timer with the System turned on.
* You can select up to 99 groups and 150 chapters/tracks/files.
To cancel the Daily Timer, select DAILY (1 – 3) you want to
cancel, then press CANCEL (while holding SHIFT).
To turn on the Daily Timer, select DAILY (1 – 3) you want
to turn on, then press ENTER/SET.
Sound & Picture Adjustments
Adjusting the Sound
Various Bass Effect—To create a sound suitable for the
playback source.
On the main unit On the remote
1 —To select the picture appearance
1 —To select the type of video signal output
LITEnEASY Suitable for Karaoke and classical music. You
can obtain a comfortable bass sound.
MOVIE Suitable for a video source and playback of
external component. You can obtain a strong
bass sound.
TECHNO Suitable for disco or techno music. You can
obtain a strong bouncy bass sound.
TURBO Suitable for most kinds of music and playback
of external component. You can obtain a
balanced bass sound.
AUTO The System automatically applies TURBO,
LITEnEASY, MOVIE or TECHNO according
to the playback source (initial setting).
OFF No sound effect.
1 —To activate or deactivate the audio
Subwoofer level adjustment (for NX-D7/NX-D5)
—From level 1 to level 5
Superbass level adjustment (for NX-D3/NX-DC3)
—From level 1 to level 5
On the main unit
—To select the usage for HDMI CEC (refer to
NX-D7/NX-D5
NX-D3/NX-DC3
On the remote
Output Signals
DOLBY
PCM ONLY
DIGITAL/PCM
2
NX-D7/NX-D5 NX-D3/NX-DC3
48 kHz, 16 bit Linear PCM
3D Phonic (for DVD/CD and USB1)—To create
3-dimensional sound field
2
• This does not function for MPEG-1/MPEG-2/ASF/DivX
48 kHz, 16 bit Linear PCM
files.
ACTION Suitable for action movies and sports programs.
DRAMA Creates natural and warm sound. Enjoy movies
in a relaxed mood.
THEATER Enjoy sound effects like in a major theater.
32/44.1/48 kHz, 16 bit Linear PCM
OFF Canceled.
Listening to the Radio
To select the AM tuner interval spacing
1 Select "TUNER AM."
2 On the main unit, while pressing KARAOKE
SCORING, touch 4 or ¢ to select the AM
tuner interval spacing (9 kHz or 10 kHz).
Tuning in to a Station
While FM or AM is selected...
2 sec.
Daily Timer Daily Timer
DAILY2 = ON (Time) DAILY3 = ON (Time)
Recording Timer (for NX-D7)
Clock setting
REC TIMER = ON (Time)
Frequency starts changing on the display. When a station
(frequency) with sufficient signal strength is tuned in, the
frequency stops changing.
Setting the Recording Timer (for NX-D7)
• When you repeatedly press the button, the frequency
Preparation:
changes step by step. To manually stop the search, press
either button.
• Connect a USB device to the USB 2 terminal.
• Change the source to "USB2" and check that the USB • The ST indicator lights while an FM stereo station with
device is properly detected by the System. sufficient signal strength is tuned in.
• Make recording settings.
1 Select REC TIMER time setting mode (ON) If the FM reception is poor
2 Set the timer as you like.
Repeat the procedure for the following settings until
finished.
The MONO (monaural) indicator lights on the display.
Reception will improve though stereo effect is lost—
Monaural reception.
To restore the stereo effect, press the button again. The
MONO (monaural) indicator disappears.
1 Set the hour then the minute for on-time.
2 Set the hour then the minute for off-time.
Presetting the Stations
3 Select the playback source—"TUNER AM, " "AUDIO
You can preset 30 FM and 15 AM stations.
IN, " or "TUNER FM. "
4 For "TUNER AM" or "TUNER FM": Select a preset 1 Tune in to a station you want to preset.
channel. • You can also store the monaural reception mode for
5 Select the volume level ("MIN" to "MAX" and "– –"). FM preset stations if it has been selected.
If you select "– –, " the volume is set to the same level 2 Press ENTER/SET to activate the preset number
as when the System was last turned off.
entry mode.
Once settings are completed, the timer setting
• Finish the following process while the indication on
information appears in sequence.
the display is flashing.
3 Turn off the System (on standby), if you have set
3 Select a preset number for the station you store
the timer with the System turned on.
using the number buttons.
• Recorded files are stored into the group named "TIMER. "
4 Press ENTER/SET to store the station.
To cancel the Recording Timer, select REC TIMER, then To tune in to a preset station
press CANCEL (while holding SHIFT).
1 Select the band (FM or AM).
To turn on the Recording Timer, select REC TIMER, then
2 Select the preset number using the number
press ENTER/SET.
buttons.
21
Headphone Surround—To enjoy a surround
Setting My Sound (for DVD/CD and USB1)
effect while listening through headphones.
My Sound creates an appropriate equalization pattern for
your listening condition.
• This only functions while listening to disc/USB device.
• This does not function for DivX files.
• This does not function for MPEG-1/MPEG-2/ASF/DivX
To set up My Sound
files.
1 Select "DVD/CD" or "USB1" as the source.
SURR ON HP Surround is activated.
2 Enter My Sound setup to measure your hearing.
SURR OFF Canceled.
2 sec.
• If you plug in the headphones while 3D Phonic is in use,
Headphone Surround is turned on automatically.
• When 3D Phonic is not in use and Headphone Surround is
turned on, unplugging the headphones turns 3D Phonic to
"ACTION. "
Clear Voice (for DVD/CD and USB1)—To make
dialogues clear for a center channel signal on
"MY SOUND" and "MEASURE" appear alternately on
multi-channel software, and 2-channel software
the display.
with 3D Phonic activated
3 Start the measurement.
A test tone comes out of the speakers.
Selecting the Sound Modes
Sound Mode (for DVD/CD and USB1)—To
select one of the preset Sound Modes
ROCK Boosts low and high frequency. Good for
acoustic music (initial setting).
POP Good for music with an emphasis on vocal.
On the TV
CLASSIC Good for classical music.
4 Each time you hear the tone, press ENTER/SET
DANCE Increases resonance and bass.
to memorize the measurements.
Adds depth and brilliance to the sound.
HALL You hear 5 test tones from the speakers.
After finishing the measurement, an appropriate
STADIUM Adds clarity and spreads the sound, as in an
equalization pattern is created and it is shown in white
outdoor stadium.
on the TV screen.
USER1/2/3 Your individual mode stored in memory. See
below.
FLAT Canceled.
To create your own sound modes (User Mode)
1 Select one of the preset Sound Modes.
2 Press ENTER/SET. On the TV
3 Press 2 or 3 to select BASS (bass) or TRE (treble) • The last equalization pattern stored into the selected
preset number is shown in green.
to adjust.
• To return to the measurement, select "EXIT" on the
4 Press 5 or ∞ to adjust the parameters then press
TV screen, then press ENTER/SET.
ENTER/SET.
5 Select a preset number from 1 to 3 to store the
5 Press 2 or 3 to select one of the user modes
equalization pattern using the cursor buttons.
(USER1–3) to store your setting into.
6 Press ENTER/SET to store the equalization
6 Press ENTER/SET to finish.
pattern.
• To store other equalization patterns, press the button
again and repeat steps 3 to 6.
To select the preset My Sound, press MY SOUND
repeatedly.
23
Listening to a Tape (for
NX-DC3)
To insert or remove a tape
You can play back a type I tape.
• The use of C-120 or longer tape is not recommended.
Insert* Remove
Open Close
* With the tape side facing front
To start To stop
To rewind and fast forward
Listening to External
Equipment
To connect a digital audio player
You can listen to the digital audio player connected to the
AUDIO IN jack.
Stereo mini plug (not supplied)
From audio output
(or headphone out,
etc.)
The illustration above is for NX-D7.
• Make sure to turn down the volume on the System to
minimum level before starting playback.
To adjust the audio input level
If the sound from the device connected to the AUDIO IN
jack is too loud or too quiet, you can preset the audio input
level through the AUDIO IN jack (without changing the
volume level).
While "AUDIO IN" is selected as the source...
• As the number of the level increases, the preset input level
is increased.
22
Presetting Automatic DVD Sound Increase Level
DVD LEVEL—To select the sound increase level for the
currently loaded DVD, if DVD sound is recorded at a lower
level than other discs and sources.
Changing the Picture Tone
To select a picture tone
While playing, press VFP, then select the preset picture tone
using the cursor buttons.
NORMAL Normally select this.
CINEMA Suitable for a movie source.
USER1/2 You can adjust parameters and can store
On the TV
the settings. (See below.)
To adjust the picture tone
1 Select either USER 1 or USER 2.
2 Select a parameter to adjust using the cursor
buttons then press ENTER/SET.
GAMMA Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST Adjust if the brightness ratio is
unnatural (–7 to +7).
SATURATION Adjust if the picture is whitish or
blackish (–7 to +7).
TINT Adjust if the human skin color is
unnatural (–7 to +7).
Adjust if the picture is indistinct (–8
SHARPNESS
to +8).
3 Adjust the parameter using the cursor buttons,
then press ENTER/SET.
4 Repeat steps 2 and 3 to adjust other parameters.
To clear the screen, press VFP again.
24