Samsung Galaxy S4 User Manual page 201

Note: The process of the initial TV activation can take up to 10
seconds. Please do not press the button again.
8. If the TV turned on, tap Yes.
– or –
If the TV did not turn on after tapping
and waiting 10 seconds, tap No or Retry.
9. From the Choose Your TV Tuner screen, select the entry
that corresponds to your current channel control
method:
• Cable/Satellite/STB/PVR/DVR: selected when changing
channels is done via a receiver box. Channels are not changed
via the TV remote but rather through the receiver/box.
• My xxx TV: selected when a signal is fed directly into the TV
and no box is used. Channels are changed directly on the TV by
using the TV remote and not a box's remote.
Note: Try matching your current channel selection method.
(Power)
DRAFT
Internal Use Only
10. Select the Satellite Box Brand from the available list.
For example, DirectTV
• If your brand does not appear in the list, tap Other Satellite
Box Brands and follow the on-screen instructions.
Important! You must configure your set top box for IR
communication with your device. If you do not
select More Info.. below and follow the on-screen
instructions you may not be able to properly use
the application.
11. When prompted to Enable IR, tap More Info.. to learn
how to configure your set top box to receive and
respond to IR controls.
12. Only after completing the IR setup process and
programming your box, press
Note: This IR programming of your set top box is a one-time
process and once successful should not need to be
repeated.
13. If prompted to either personalize your experience or
®
configure Netflix , follow the on-screen instructions.
®
.
(Back).
Multimedia 195