CoolFun CA-35 Please read this manual carefully before starting the machine. Keep it in a safe place for future reference. If the device is resold, this operating manual must be handed over to the purchaser along with the device. Contents...
CoolFun CA-35 Notes on using the instruction manual The following symbols are used in this instruction manual: Caution! Safety instruction: failure to observe this instruction can cause injury or damage the device. Caution! Safety instruction: relating to a danger from an electrical current or voltage.
CoolFun CA-35 Operating the device safely • Electronic devices are not toys. Always keep and use the device well out of the reach of children. • Danger of fatal injury. Do not touch exposed cables with your bare hands. This especially applies when operating the device with an AC mains power supply.
CoolFun CA-35 Operating the device safely with gas • Only operate the device with gas outdoors. • Do not use gas to operate the device in cars, boats or enclosed spaces. • When using the device in tents, awnings and on level patios, ensure that there is sufficient air circulation and ventilation.
CoolFun CA-35 Operating the cooler Before starting your new cooler for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons (please also refer to “Cleaning and maintenance” on page 11). Food may only be stored in its original packaging or in suitable containers.
CoolFun CA-35 Connecting to 12 V DC You cannot set the temperature with the thermostat control during battery operation. The device is simply switched on and starts cooling. Disconnect the cooler from the battery when the engine is not running as otherwise the battery will be completely run down.
Page 9
CoolFun CA-35 ➤ Ensure that – The thermostat control for 220 V – 240 V operation ( 2, page 4) is in the “0” position – The battery plug is not connected. ➤ Press in the rotary switch ( 3, page 4) and hold it in for approx. 10 s to force out any air in the hose connection.
CoolFun CA-35 Replacing the gas bottle Only change the gas bottle in well ventilated areas. Make sure that there are no sources of ignition in the vicinity. Only change the gas bottle when the cooler is switched off. ➤ Switch off the cooler by completely shutting the rotary switch ( 3, page 4) by turning it clockwise.
CoolFun CA-35 ➤ Clean the interior of the cooler with a damp cloth from time to time. ➤ Clean the exterior of the device with a damp cloth. Disposal Disposing of packaging material Do not simply throw the packaging materials away. Please observe the following instructions: ➤...
CoolFun CA-35 Troubleshooting In the event of malfunction, please check the following: Fault Possible cause Suggested remedy The cooler does not The cooler is not Check if the voltage supply is in full work. properly connected working order. to the electricity Check if all electrical contacts are in full supply.
CoolFun CA-35 Technical data Product Code: CA-35-12240PB37 Capacity: 35 L Gas consumption: 12 g/h Connection pressure: 2.75kPa Connection to 220 V – 240 V Power consumption: 72 W Current consumption: 0.3 A Connection to 12 V Power consumption: 72 W Current consumption: 6.1 A...
CoolFun CA-35 WAECO Australia WAECO Pacific Pty. Ltd. WAECO Victoria WAECO Western Australia A A U U S S 1 John Duncan Court 1/97 Lewis Road 9 Hod Way Varsity Lakes, QLD, 4227 Wantirna VIC 3152 Malaga WA 6090 phone: 1800 21 21 21...
Need help?
Do you have a question about the CoolFun CA-35 and is the answer not in the manual?
Questions and answers