Activating Tests; Restoring Factory Settings; Saving Modified Settings Into The Permanent Memory - Satel SATELLINE-3ASd Epic Pro 35W User Manual

12.1.7 Activating tests

Tests can be activated by selecting main menu selection "9". For more information on tests, see
Chapter 5.4. Tests are activated by setting the status of the desired test to "ON" and will remain
active until the value of the selection in the menu is returned to the value "OFF".
Enter selection >9
Tests setup
-----------
1) Short block test
2) Long block test
NOTE! Message Routing and FCS mode must be disabled in prior to set ON the Test mode.

12.1.8 Restoring factory settings

Selecting main menu selection "A" can restore factory settings.
Enter selection >A
Restore factory settings
------------------------
Do you want to restore factory settings? (Y/N)>
Restoring is confirmed by pressing "Y" (Y=YES) or cancelled by pressing "N" (N=NO). Also the
pressing of "ESC" button at any point in the procedure will return the display to the previous
(next higher) menu level without restoring factory settings.

12.1.9 Saving modified settings into the permanent memory

All modified settings must be saved into the permanent non-volatile memory of the radio modem
before switching out of the Programming Mode. Selecting the main menu selection "E"
automatically saves the settings:
Enter selection >E
Configuration saved!
Please turn off program mode switch!
SATELLINE-3ASd Epic Pro and Epic Pro 35W
OFF
OFF
71
User guide version 1.4