DIVIDE Function
This function allows you to divide one track into two
separate tracks. It is useful, for example, when you want to
add track marks at a certain point within a track or if you
want to separate a recording.
• To stop any time during editing process, press MD EDIT.
On the unit ONLY:
1
Insert an MD you want to edit into the MD B
loading slot.
2
Press one of the MD number buttons (MD 1, MD 2,
and MD 3) corresponding to the MD you want to
edit.
MD deck B starts playing the MD.
3
Press MD EDIT.
MD deck B enters editing mode (with DIVIDE
function selected).
4
Press SET.
The information of the first track (or the current track)
of the MD appears in the main display.
5
Rotate the right jog dial to select the track you want
to divide.
The selected track starts playing.
Ex. When you want to divide track 5
• If you do not rotate the right jog dial, the same track
plays repeatedly.
• You can rotate the left jog dial to find the dividing
point.
6
Press SET when you find the point where you want
to divide the track.
MD deck B repeats the selected point — a 3-second
period following the dividing point.
• If the dividing point is satisfactory, go to step 8.
• If the dividing point is not satisfactory, go to the next
step.
7
Rotate the left jog dial to precisely adjust the
dividing point.
• You can shift the dividing point up to ±128. This
range (±128) corresponds to approximately ±8
seconds from the original point (Position 0).
When you stop rotating the left jog dial, the unit
repeats the newly selected dividing point.
• When you find the right position, go to the next step.
• If you want to cancel the dividing point, press
CANCEL.
8
Press ENTER (START) to finish the editing
procedure.
9
Press 0 for MD deck B to eject the MD.
"WRITING" appears while the editing you have made
is being recorded on the MD.
To join the divided tracks again, see the JOIN function.
– 40 –
Continued