Pcb Control - Panasonic NR-B32FX2 Service Manual

3. Remove two screws that are fixation of PCB (Panel), and
unhook four hooks of PCB (Panel). Then take PCB
(Panel) out from Button Control.
NOTICE
• Be careful not to break PCB (Panel) when it is removed
and installed. It might become cause of defective opera-
tion.
11.6. Disassembly of PCB Control

11.6.1. PCB Control

1. Disconnect the connectors, and release a screw of right
side of PCB Control.
Take the hooks off first, and remove PCB Control.
CAUTION
Be careful not to touch directly electric parts on the
PCB Control when you remove and install PCB Con-
trol.
39