Chapter 1
Product Overview
Reset Button
The Reset button resets the router configuration to the default configuration set by the factory. To restore
the router configuration to the default configuration set by the factory, simultaneously press the reset
button while applying power to the router.
Note
When the CLI reboot command is issued while the embedded wireless AP is running Cisco Unified IOS
software, the router reboots and the AP continues running. Clients with Cisco Unified IOS software are
controlled by a wireless LAN controller (WLC) and can be reset only by the controller.
LEDs
The LEDs are located on the front panel of the router.
series, 880 series, and 890 series ISRs.
Table 1-1
LED Descriptions for the Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series ISRs
LED
Color
Power OK
Green
Link Status FE0
Green
Link Status FE1
Link Status FE2
Link Status FE3
Link Status FE4
Green
Link Status FE5
Link Status FE6
Link Status FE7
FE WAN Port
Green
Link Status
GE WAN Port
Green
Link Status
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-04
Description
On—DC power is being supplied to the router and the
Cisco IOS software is running.
Blinking—Bootup is in process, or the router is in
ROMMON monitor mode.
Off—Power is not supplied to the router.
On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
On—Ethernet port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Ethernet port is not connected.
On—Port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Port is not connected.
On—Port is connected.
Blinking—Data is either being received or being
transmitted.
Off—Port is not connected.
Table 1-1
describes the LEDs for the Cisco 860
860 Series 880 Series
All models All models All models
All models All models All models
—
—
861
881
models
models
—
—
Hardware Features
890 Series
All models
All models
All models
1-13
Need help?
Do you have a question about the 860 Series and is the answer not in the manual?
Questions and answers