Recording Sound To Cassette Tapes - JVC CA-UXQ3S Instructions Manual

Micro component system consists of ca-uxq3s and sp-uxq1s
Table of Contents

Advertisement

Recording Sound to Cassette Tapes

Recording Sound
Main unit
Remote control
NOTE
• The sound input level during recording is
automatically adjusted.
• When you record tracks from a CD or MP3, a 4-
second blank is inserted between tracks in the
recording. You can record tracks with no blank
time. (
page 22)
CAUTION
• It may be unlawful to record or playback
copyright material without the consent of the
copyright owner.
• Do not use long cassette tapes such as C-120 or
C-150. Long cassette tapes are thin and stretch
easily, and may become tangled in the inner part
of the main unit.
• Since this product is not compatible with TYPE II
and TYPE IV cassette tapes, do not use these
types of cassette tapes. This product does not
meet the specifications for these tapes, so sound
is not properly recorded to these types of cas-
sette tapes. You cannot obtain proper playback
sound.
Preventing recorded sound from
being erased
• Write protect tags are attached to a cassette
tape for preventing the erasing of recorded
sound. They enable you to avoid losing impor-
tant recordings because once you snap off the
write protect tags, you cannot record to the cas-
sette tape or erase recorded material.
21
• When you want to use the cassette tape for
recording again, cover the tag holes with adhe-
sive tape.
Write protect
tag for side B
1
Insert a cassette tape for
recording.
• Before inserting the cassette tape, wind the
tape past the leader part of the cassette
tape.
Magnetic tape
Leader tape (unrecordable part)
(recordable part)
2
Press
to select the reverse
mode.
• Each time you press
gles as follows.
: For one-way recording on either side.
: For one return recording on both sides.
: Pressing
one return recording on both sides.
3
Select a sound source for recording.
Sound source
Press
CD or MP3
(The CD is stopped.)
Select the radio station whose broad-
Radio broad-
cast
cast you want to record (
Sound from
Press
other equip-
ment (AUX)
the other equipment (
4
Press
on the main unit.
Write protect
tag for side A
, the display tog-
automatically starts
Operation
, and then press
.
page 14).
and prepare playback on
page 20).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lvt1218-005aUx-q3sUx-q3sacUx-q3satUx-q3sseSp-uxq1s

Table of Contents