Fuses - BMW S 1000 RR Rider's Manual

Fuses

Removing fuse
Risk of fire if an attempt is
made to jumper defective
fuse.
Always replace defective fuses
with new fuses of the correct
amperage rating.
Switch off the ignition.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Remove the rear seat (
Squeeze the latches together
and remove cover of fuse
box 1.
To replace the main fuse, re-
54). move cover 2 of the relay box.
Pull the defective fuse up and
out of the fuse box.
If fuse defects recur fre-
quently have the electric
circuits checked by a specialist
workshop, preferably an author-
ised BMW Motorrad dealer.
Install the fuse
Remove the defective fuse and
replace it with a fuse of the
correct amperage rating.
The fuse assignments and
fuse amperage ratings spe-
cified for your motorcycle are lis-
ted in the section entitled "Tech-
nical data". The figures in the
graphic correspond to the fuse
numbers.
Close the fuse cover.
The latch engages with an
audible click.
Install the rear seat (
9
139
z
54).