Table of Contents
Advertisement
VIVOTEK
Hardware Reset
Reset Button
The reset button is used to reset the system or restore the factory default settings. Sometimes
resetting the system can return the camera to normal operation. If the system problems remain
after reset, restore the factory settings and install again.
Reset: Press the recessed reset button. Wait for the Network Camera to reboot.
Restore: Press and hold the reset button until the status LED rapidly blinks. Note that all settings
will be restored to factory default. Upon successful restore, the status LED will blink green and
red during normal operation.
Micro SD/SDHC Card Capacity
This network camera is compliant with Micro SD/SDHC 16GB / 8GB / 32GB / 64GB and other
preceding standard SD cards.
8 - User's Manual
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the FD8169 and is the answer not in the manual?
Questions and answers