Set/Edit Static Ip - AT&T Synapse Installation Manual

Set/Edit Static IP

If your business requires a static IP address, contact your network administrator.
To set and edit static IP Address:

IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status
Use or to mov e highlight.
Use or to cy cle through options.
Save
Figure 79. 030 IP Settings
Static IP Edit
IP Address:
Subnet Mask:
Gatew ay:
DNS Server:
Use dial pad to enter digits and press #
to enter a dot.
Save Backspc
Figure 80. 030 Set/Edit Static IP
Getting Started
Synapse Installation Guide
1. Access the Admin Settings menu: Press MENU,
then press 3 on the dial pad, then enter the
Auto
Admin password, and press SELECT.
2. Press 3 on the dial pad to display the IP Settings
screen shown in Figure 79 and Figure 81.
3. Press 2 to display the screen shown in Figure 80
or Figure 82.
Quick
Dial
4. Enter digits:
There is a 12-digit limit on the number field

(not including dots).
On the 030, pressing the pound key (#)

inserts a dot. On the 020, pressing
inserts a dot.
Pressing

positioned next to a dot deletes the dot and
Quick
the digit to the left of the dot.
Dial
5. Press the
through the four fields.
6. Press
to the Admin Settings menu.
when the cursor is
or Navigation key to cycle
to accept the changes and return
84
IP Settings
1. IP Configuration
2. Set/Edit Static IP
3. IP Status
Figure 81. 020 IP Settings
Set/Edit Static IP
IP Address:
Subnet Mask:
Save "." Backspc
Figure 82. 020 Set/Edit
Static IP