Panasonic KX-NCP500 Getting Started page 44

4.3.1 Assigning the IP Addressing Information
4.
Not using a DHCP server when the IP-PT is on the remote office LAN
All the IP addressing information must be assigned manually.
Follow the procedure below to assign the IP addressing information.
KX-NT300 series (except KX-NT321)
To start programming
Supply power to the IP-PT.
To set the IP address of the IP-PT
Select "Network".
IP Address*
To set the subnet mask address
Select "Subnet Mask".
To set the default gateway address
Select "Default Gateway".
To enter the IP address of the IPCMPR card (PBX IP Address)
Return to the
Menu screen.
ENTER
Continued on next page
44 Getting Started
Press "SETUP" when it is displayed.
ENTER Select "Disable"
for DHCP setting.
1
ENTER
Subnet Mask Address*
ENTER
Default Gateway Address*
ENTER
Software version 2.00 or later only
Select "PBX". ENTER
PBX IP Address
SETUP
Select "IP Address".
2
Select "PBX IP ENTER
Address".
ENTER
ENTER
ENTER
3
ENTER
Select "Primary
PBX".