Information About The Activation Keys; Type And Maximum Number Of Activation Keys - Panasonic KX-NS1000 Installation Manual

3.1.1 Type and Maximum Number of Activation Keys

3.1 Information about the Activation Keys

Activation keys are required to use IP trunks and IP telephones on a private IP network with a KX-NS1000.
Also, to upgrade the software to use enhanced features, the corresponding activation keys for that feature are
required. Some activation keys are provided by default, some are provided free for a limited period, and others
are provided separately as activation key files.
Notice
When stacking PBXs to a KX-NS1000, the activation keys that were used with the PBXs cannot be used
with the KX-NS1000.
3.1.1 Type and Maximum Number of Activation Keys
The PBX supports the following type and number of activation keys. The preinstalled activation keys on the
mother board are shown with "[ ]".
When the number of preinstalled activation keys is not enough for the desired configuration or when you wish
to use enhanced features, additional activation keys in the form of activation key files can be installed using
Web Maintenance Console.
When the PBX is connected in a One-look network, activation keys should be installed on the appropriate PBX
as shown in the tables below.
Note
•
Store the downloaded activation key files in your PC or a memory device. They can then be reinstalled
when changing the Storage Memory Card or in an emergency situation.
•
For information about how to obtain the additional activation keys, refer to "3.1.2 Activation Key Code
and Key Management System".
•
For information about how to install the activation key files using Web Maintenance Console, refer to
"5.4.4 Installing Additional Activation Keys".
IP Trunks
Model No. Activation Key Type
KX-NSM102 2 IP Trunk
KX-NSM104 4 IP Trunk
KX-NSM108 8 IP Trunk
KX-NSM116 16 IP Trunk
*1 You need to set the number of installed activation keys to be used for H.323 trunks through system programming. By default, all
installed activation keys will be used for SIP trunks.
Refer to "2.3.3 System Capacity" for the maximum number of H.323 trunks.
*2
68 Installation Manual
Description
Allows the use of 2 IP trunks (H.
323/SIP).
Allows the use of 4 IP trunks (H.
323/SIP).
Allows the use of 8 IP trunks (H.
323/SIP).
Allows the use of 16 IP trunks (H.
323/SIP).
Maximum IP Trunks
Stand-alone One-look
System Network
256 IP trunks
(H.323/SIP)
*1*2