Husqvarna WRE 125 2011 Workshop Manual page 97

8
Ed. 05-2011
ENGINE DISASSEMBLY
Slide cylinder (6) out of crankcase stud bolts, by duly supporting piston with
your hands when it is separated from cylinder.
6
WARNING - When removing the cylinder, do not let it rotate as
piston ring end could enter gaps thus preventing piston removal and
causing damage to the piston ring itself. To eliminate this risk, removal
operations shall be carried out with the piston at BDC.
H06551
Remove one of piston pin (7) retainers, duly support piston and partially slide
out piston pin using a cylindrical pin (8) until piston is free.
6
Remove piston (9) with piston pin.
Slide roller cage out of connecting rod.
7
On reassembly, replace gasket (10).
10
H06552
F.15