Specifications - Ferris IS2100Z Series Operator's Manual

Is2100z series zero-turn riding mower
Hide thumbs Also See for IS2100Z Series:
Table of Contents

Advertisement

Troubleshooting Common Cutting
Problems
Problem: Streaking
Cause
Blades are not sharp.
Blades are worn down too far.
Engine speed is too slow.
Ground speed is too fast.
Deck is plugged with grass.
Not overlapping cutting rows enough.
Not overlapping enough when turning.
Problem: Scalping
Cause
Lawn is uneven or bumpy.
Mower deck cutting height is set too
low.
Ground speed is too fast.
Deck is not leveled correctly.
Tire pressure is low or uneven.
Problem: Stepped Cutting
Cause
Deck is not leveled correctly.
Tires are not properly inflated.
Blades are damaged.
Deck shell is damaged.
Mower spindle is bent or loose.
Blades are installed incorrectly.
Problem: Uneven Cutting
40
Remedy
Sharpen your blades.
Replace your blades.
Always mow at full throttle.
Slow down.
Clean out the mower.
Overlap your cutting rows
When turning your effective cutting
width decreases–overlap more when
turning.
Remedy
Roll or level the lawn.
Raise the cutting height.
Slow down.
Correctly level the deck.
Check and inflate the tires.
Remedy
Level the deck correctly.
Check and inflate the tires.
Replace the blades.
Repair or replace the deck.
Repair or replace the spindle.
Reinstall the blades correctly.
Problem: Uneven Cutting
Cause
Deck is not leveled correctly.
Blades are dull or worn.
Blades are damaged.
Deck is clogged with grass clippings.
Deck shell is damaged.
Mower spindle is bent or loose.
Blades are installed incorrectly.
Tires are not properly inflated.
Problem: Stingers
Cause
Blades are not sharp or nicked.
Blades are worn down too far.
Engine speed is too slow.
Ground speed is too fast.
Deck is plugged with grass.

Specifications

ENGINE
Fits models: 5901301 & 5901307
25.5 Gross HP† Kawasaki
Make
Model
Displacement
Electrical System
Oil Capacity
Fits models: 5901300 & 5901302
26 Gross HP* Briggs & Stratton Vanguard
Make
Briggs & Stratton
Model
49R977-9322-96
Displacement
49.42 Cu. in (810 cc)
Electrical
12 Volt, 16 amp. Alternator, Battery: 340 cca
System
Oil Capacity
2.1 qt. (2.0 L) w/ filter
Fits models: 5901333
28 Gross HP* Briggs & Stratton EFI
Make
Briggs & Stratton
Model
49E877-0001-G1
Displacement
49.42 Cu. in (810 cc)
Electrical
12 Volt, 20 amp. Alternator, Battery: 340 cca
System
Remedy
Level the deck correctly.
Sharpen or replace the blades.
Replace the blades.
Clean out the deck.
Repair or replace the deck.
Repair or replace the spindle.
Reinstall the blades correctly.
Check and inflate the tires.
Remedy
Sharpen your blades.
Replace your blades.
Always mow at full throttle.
Slow down.
Clean out the mower.
Kawasaki
FX801V
52.0 Cu. in (852 cc)
12 volt, 15 amp charging coil; Battery:
340 cca
1.9 US qt. (1.8 L) w/ filter
ferrisindustries.com

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IS2100Z Series and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF