Sanyo MCH-900F Service Manual page 25

REPLACING THE PRINCIPAL PARTS OF THE CD CHANGER MECHANISM
h. PRECAUTIONS WHEN ASSEMBLING THE CD CHANGER MECHANISM
AND CD MECHANISM
#
(1) Does the CD mechamsm move up and down smoothly?
/
CAM GEAR (391 )
CD MECHANISM
. Check gap. LOADING TABLE
+1----
T&l
Is the turntable touching the loading table?
'l-l
= TURN TABLE
(2) When placing the CD on the loading table, make sure the CD is centered.
If there is any tilt or the like, check the movement of the floating springs (379, 380) of the CD mechanism,
and make sure the rubber cushions (381 ) are mounted in the specified orientation.
+1-
Check the gap here.
Confirm that the rubber cushions are
mounted in the correct orientation.
EXPLODED VIEW ( CABINET &
CHASSIS ~ )
-
I
\,
—
-24-
-s
I
.
-25-