Resetting/Killing A Line - Perle IOLAN SDS User Manual

Tools

Resetting/Killing a Line

After you make changes to the
reset/kill the line to test the changes by selecting
Device Server, you might be prompted to confirm to kill the line; if you are on a 2-port+ Device
Server, the following window is displayed (shown for a SCS32):
Select the lines you want to reset/kill and then click
Select All
If you are happy with the configuration changes, you can download the configuration by selecting
,
Tools
you reboot the Device Server by selecting
196
Line
button and then clicking
Download Configuration to Unit
IOLAN Device Server User's Guide, Version 2.5
configuration parameters and click the
,
Tools Kill Line
OK . You can reset all the lines by clicking the
.
OK
. Of course, your new configuration will not take effect until
Tools , Reboot Server
Apply button, you can
. If you are connecting to a 1-port
.