Battery Replacement - Transmitter; Battery Replacement; Appendix; Wiring Diagram - Jøtul GF 500 DV IPI Installation And Operation Instructions Manual

Remote Transmitter Battery Replacement
The life-span fo the transmitter batteries depends upon
battery quality, the frequency of set point changes,
freqency of ignition call changes, etc.
When battery power is low, a Battery icon will appear on
the transmitter display before all power is lost. See fig. 73.
The icon will disappear with installation of three, 1.5 AAA
fresh batteries.

Appendix

Main IFC Harness
Optional Accent
Optional Blower
Lamp
Figure 76. GF 500 DV IPI Proflame 2 Components
IFC Battery Replacement
A red LED on the IFC board indicates low battery power.
1. Switch Burner to OFF and disconnect power to the stove.
2. Access the battery box from behind the right side of
the control compartment. See fig. 78. Disengage it from
the hook & loop tape.
3. Install four, 1.5v AA batteries and return box to the
compartment.
4. Reconnect power to the stove.
Optional Pro ame 2 Stepper Regulator
SIT Pro ame Valve
Split Flow Valve
Battery Pack
Four, 1.5v AA
Auxiliary Burner
Switch
SIT Proflame 2 IFC
139636 GF 500 DV IPI 7/28/14
Main
Burner Switch
120VAC Power
35