Operation; Bubble Level; Tripod Setup - DeWalt DE0881-XE Instruction Manual

F
FIG. 1
A
J
I
C
G
E
B
DESCRIPTION (FIG. 1)
WARNING: Never modify the tripod or any part of it. Damage or personal injury
could result.
A. Rotary head mount
B. Quick-adjust latch
H
C. Legs
D. Elevator crank handle
E. Foot
D
INTENDED USE
Your tripod has been designed to extend the capabilities of your laser. The tripod helps
to position the laser on rough, out-of-level surfaces. The tripod can be used both
indoors and outdoors.
C
DO NOT let children come into contact with the attachment or laser. Supervision is
required when inexperienced operators use this attachment.

OPERATION

Instructions for Use
WARNING: Always observe the safety instructions and applicable regulations.
WARNING: Refer to the laser manual to be used with this attachment.

Bubble Level

Use the bubble level (J), located under the rotary head mount (A), to ensure the tripod
E
is level.

Tripod Setup

1. Spread the legs (C) apart to install the tripod in upright position.
2. Tighten the locking collar (G).
3. Adjust the legs (C) if required so that each of the feet (E) is firmly touching the
ground.
4. Mount the laser on the tripod.
E
2
F. Mounting thread
G. Locking collar
H. Elevator column
I. Elevator lock knob
J. Bubble level