Router Configuration; Internet Access - Siemens SpeedStream 4200 Quick Start Manual

Step 3
PC Configuration Procedures
Windows Configuration
In order to setup the SpeedStream
your PC must first be configured to obtain an
IP address from a DHCP server. Follow the
procedure below:
Note: The following procedures cover configuration of a PC
running Windows XP. Please refer to the User Guide on the
CD-ROM for help configuring other operating systems.
1. Click Start > Control Panel.
2. Double-click the Network
Connections icon.
3. Double-click your Network Card.
4. Click Properties.
5. Select Internet Protocol (TCP/IP).
6. Click Properties.
7. Select Obtain an IP address
automatically.
8. Select Obtain DNS server address
automatically.
9. Click OK and exit out of the Control Panel.
10. Configure Internet Access using the
procedure that follows.

Internet Access

Next, make sure your PC will use the
SpeedStream device (and not Dial-Up
®
Networking) when connecting to the
Internet. Follow the procedure below:
1. Click Start > Control Panel.
2. Double-click the Internet Options icon.
3. Click the Connections tab.
4. Click Setup.
6
>
device,
®
5. Click Next.
6. Select Connect to the Internet.
7. Click Next.
8. Select Setup my connection manually.
9. Click Next.
10. Select Connect using a broadband
connection that is always on.
11. Click Next.
12. Click Finish.
13. If you have a router, configure the router
using the Router Configuration procedure
that follows.

Router Configuration

Windows Me and XP users: If you have Universal
Plug and Play (UPnP) enabled, Windows may
detect the SpeedStream
and provide a shortcut to the device on the
desktop or system task tray. The icon will be
labeled as "Residential Gateway." Double-click
the icon and skip to step 3.
1. Start your Web browser.
2. In the Address box, enter the following:
http://speedstream
3. When prompted for a username and
password, type admin for the password
only (username is not required).
4. Click Login and enter the username
and password provided by your service
provider.
5. Click Save.
6. If additional configuration is desired,
select Setup to configure DHCP, firewall
settings, security options, and also to
view status and statistical information.
Note: If your Service Provider requires you to use separate
PPPoE client software, discontinue use of this software.
The SpeedStream device will negotiate the PPPoE logon
®
to your service provider's network.
Congratulations! You have
completed the installation of
your SpeedStream
device upon startup
®
device.
®