Table of Contents
Advertisement
VHF System Description
To the VHF system can be connected up to 7 control units. Each
control unit has a unique location (1-7). If a control unit wants to
control the transceiver, it has to be master of the system. The
following describes the display read-outs shown in connection with
different system priorities of the control units:
The control unit assigned location number 1 has the highest priority
in the VHF system and is able to become master of the system at
any time needed.
When more control units are connected to the VHF system, the main
control unit has to be assigned location number 1.
When the system is free:
If a handset is in VHF mode, the display will show:
MEM
1 08 02
If a handset is in DSC mode or the function menu is active, the
display shows the menu item.
dSC
SHIP STN
32
6
VOL
SQ
When a control unit is master of the system,
the other control units, if in VHF mode, show the following display to
indicate that the transceiver is in use by another control unit:
oCC
1 BRIDGE
If the other control units are in DSC mode or the function menu is
active, the display will show the menu item as usual.
dSC
SHIP STN
Getting the MASTER priority in the system:
To operate the transmitter, the handset has to be master of the
system. To become master of the system, simply hook off the
handset.
When the handset becomes master of the system, the display will
not change.
If the handset does not become master of the system and the
handset is operated in VHF mode, the display will show the mes-
sage:
oCC
1 BRIDGE
If the system is occupied by another control unit, hang up and wait
for the system to become free.
The control unit location name
The control unit location number
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VHF 1000 P DSC and is the answer not in the manual?
Questions and answers
How is the way to out in the hand set : hour , date and latitude longitude
To set the hour, date, and latitude/longitude on the Skanti VHF 1000 P DSC handset:
1. Set Hour and Date:
- Go to the "Time date View" section.
- Select "Set Tzone" to adjust the time zone.
- Set "Utctime" by entering:
- Hour (XX)
- Minutes (XX)
- Seconds (XX)
- Set the date by entering:
- Year (XX)
- Month (XX)
- Day (XX)
2. Set Latitude/Longitude:
- Go to the "Pos auto" or "Posupdate" section.
- Enter the desired latitude in the format X:XX’XX.
- Enter the longitude in the format X:XXX’XX.
- Confirm with UTC time if needed under "Posupdate AT Utc HXX MXX".
These settings allow manual adjustment of time and position if automatic updates are not active.
This answer is automatically generated