Scanning From Twain/Wia Compatible Application - Kyocera FS-1024MFP Operation Manual

Scanning Image to PC

Scanning from TWAIN/WIA compatible application

Be sure that you connect your PC with the machine using the USB cable and install the Kyocera TWAIN or WIA
Driver. The scan can be carried out from any TWAIN or WIA compatible application program. For details of
installation for TWAIN or WIA driver, refer to Installing Software on page 2-10.
The following procedure is an example for scan operation using the TWAIN Driver. Operate the WIA Drivers in
the same manner.
5-2
1
Connect your computer to the machine using a
USB cable.
2
Place the originals in the document processor or on
the platen.
3
Use the TWAIN-compatible application to scan
from your computer.
4
Choose the appropriate settings and click Scan.
The scanned data will be sent to your computer.
OPERATION GUIDE