Panasonic KX-TD816 Features Manual page 251

a) Outside Line (CO) Port No. :
If the T1 unit (KX-TD187) is connected, only the 8 analog ports can be used. Other
outside line expansion cards cannot be installed to the expansion slot in the master or
slave system. Also, basic outside lines in the slave system cannot be used.
b)
Outside Line (CO) No. :
Though CO No.s (09-24) are not connected to outside lines due to (a), it can be assigned
the data. And they can be used to assign T1 outside line data by Reference CO.
c)
T1 Channel No. :
T1 has outside lines for 24 channels.
d)
T1 Outside Line (CO) No. :
T1 channel No.s (01-24) are the CO No.s (25-48).
e)
Reference Outside Line (CO) No. :
The assignment to receive outside lines for T1 channels (01-24) is referred to the
assignment for CO No.s (01-24).
This can be changed easily.
In the example as follows;
T1 channel 01 refers to the data for the CO No. 01
T1 channel 02 refers to the data for the CO No. 02
T1 channel 24 refers to the data for CO No. 24
a) CO
Port
No.
01
02
:
08
f) Examples for the program [407] DIL 1:1 Extension — Day:
The assignment for DIL 1:1 (Day) destination on CO No.s (01-24)
In the example above;
T1 channel No. 01 refers to the data assigned in program [407] for CO No. 01.
It causes DIL 1:1 (Day) to be received at the extension 101.
T1 channel No. 02 refers to the data assigned in program [407] for CO no. 02.
It causes DIL 1:1 (Day) to be received at the extension 102.
Features Guide
1. The assignment for DIL 1:1 destination
b) CO c) T1
No. Channel Channel
No. CO No.
01 01
02 02
: :
08 08
09 09
10 10
: :
23 23
24 24
.
*1
.
*2
.
*3
d) T1 e)
Reference
CO No.
(Examples)
25 01
*1
26 02
*2
: :
32 08
33 09
34 10
: :
47 23
48 24
*3
General Features
f) [407] g) [408]
DIL1:1 DIL1:1
(Day) (Night)
(Examples) (Examples)
EXT. 101 EXT. 201
EXT. 102 EXT. 202
EXT. 108 EXT. 208
EXT. 109 EXT. 209
EXT. 110 EXT. 210
EXT. 123 EXT. 223
EXT. 124 EXT. 224
251