Table of Contents
Advertisement
Quick Links
ePuffer Super Mini – User's Guide
Congratulations and thank you for purchasing ePuffer Super Mini Electronic
Cigarette!
Now you can start a new beginning for a healthier lifestyle, which also creates an
environmental friendly living space for your family and friends.
Please read this manual carefully and follow its instructions before using ePuffer
Super Mini Electronic Cigarette.
Product Components
E-cigarette
Battery Component
Power line
Cartridge
Charger
Safety Information
For safe and effective use of the "electronic cigarette" and its supporting products
please read through the following information carefully, and follow the standard
operating procedures.
Use of the "E-Cigarette"
After installing the new cartridge and battery correctly, the e-cigarette is in its stand
by status and smoking can be simulated by sucking through the inhaler. Remember
to replace an old cartridge with a new one when smoke is reduced. When the power of
the lithium battery is used up, the indicator in front of the cigarette body will flash
continuously and this means that it must be replaced with a fully charged one.
Use of the AC charger
Screw the lithium battery into the charger. The charger can work normally with an
AC100V-240V 50/60Hz voltage. To reduce the risk of electric shock, the charger
should not be used outdoors in a damp environment.
Precautions for Pocket Carrying
If you are carrying the e-cigarette with you, please take care of the product separately
to avoid damage. Remember, the e-cigarette and all of its components are made
specifically for the ePuffer product. The use of any components that were not
manufactured by ePuffer will lead to electronic cigarettes malfunction and damage.
Do not use the E-cigarette while driving.
Advertisement
Table of Contents
Related Manuals for epuffer Super Mini
Summary of Contents for epuffer Super Mini
- Page 1 If you are carrying the e-cigarette with you, please take care of the product separately to avoid damage. Remember, the e-cigarette and all of its components are made specifically for the ePuffer product. The use of any components that were not manufactured by ePuffer will lead to electronic cigarettes malfunction and damage.
- Page 2 When using the ePuffer Electronic Cigarette, the act of inhaling or smoking it produces the tactile and craving satisfactions traditional smokers seek, and triggers a vaporizing process that realizes a simulated smoke that is actually a vapor mist that harmlessly evaporates into the air within seconds.
- Page 3 Characteristics of the product: 1. Humanized design, for example the temperature of the simulative smoke is similar to that of the human body. 2. No environment pollution. The exhaled smoke is a kind of gas dispersion generated during the atomization of tobacco alkaloid liquid. 3.
- Page 4 How to Use: Installation Method Step 1: Unpack the cartridge, and pick off the plastic cap of the nicotine container. Step 2: Put the cartridge into the “E-cigarette” battery. Step 3: Operating Mode – the circuit will be switched on as you inhale, and the indicator light on the front end will be lit simultaneously.
Need help?
Do you have a question about the Super Mini and is the answer not in the manual?
Questions and answers