Samsung OfficeServ 7400 General Description Manual page 9

Hide thumbs Also See for OfficeServ 7400:
Table of Contents

Advertisement

When configuring a system to meet your requirements, select the appropriate number of interface cards listed in
Part 2 of this book to support the various types of routers, switches, trunks, stations, voice mail and miscellaneous
functions. Combine both the physical ports of cabinets 1, 2 & 3 with the virtual ports in virtual cabinets 4 & 5 (see
figure 1.6) to build a system as required. Your authorized Samsung Installation and Service Company has special
knowledge and training to do this.
The following table indicates the maximum number of each circuit type or device available in the OfficeServ
7400. The system architecture is designed to be extremely flexible so as to provide a myriad of configurations.
However it is impossible to accommodate all the maximum numbers into one system.
ITEM
Max # of Analog Trunk Ports
Max # of Digital Trunk Ports
Max # of MGI Ports
Max # of Analog Sets
Max # of Digital Sets
Max # of VM ports
Max # of IP-UMS Ports
Max # of Physical Ports Supported
Max # of Virtual Ports Supported
Max # of H.323 Trunk Ports
Max # of SIP Trunk Ports
Max # of SPNet Trunk Ports
Max # of Virtual SLI Ports
Max # of Virtual DLI Ports
Max # of Samsung IP Phone Ports
Max # of SIP Phone Ports
Max # of WIP Phone Ports
Max # of Network Nodes
Max # of Station Group Members
Figure 1.6 indicates the physical and virtual cabinets available in the OfficeServ 7400. Physical card slots in cabi-
nets 1, 2 and 3 support the various combinations of cards detailed in Part 2. HARDWARE DESCRIPTIONS. Virtual
cabinets 4 and 5 provide twelve (12) slots each with each slot providing 32 ports (communication channels). The
total virtual devices allowed is 768.
OfficeServ 7400 Capacities
OfficeServ 7400
256
1008
1344
512
512
12
64
1344
768
64
64
224
192
384
480
192
192
99
99
1.4
REMARKS
32 slots x 8 ports
10 x 48 (TEPRI2)=480 + 22 x 24 (TEPRI)=528
10 x 64 (MGI64) + 22 x 32 (MGI64)
32 x 16 ports
32 x 16 ports
1 (SVMi-20) x 12 ports, (20 ports in future)
2 virtual slots x 32 (future software release)
10 x 64 (MGI64)=640 + 22 x 32 (MGI64)=704
2 Cabinets x 12 slots x 32 ports
2 virtual slots x 32 ports
2 virtual slots x 32 ports
7 virtual slots x 32 ports
6 virtual slots x 32 ports
12 virtual slots x 32 ports
15 virtual slots x 32 ports
6 virtual slots x 32 ports (future release)
6 virtual slots x 32 ports (WIP 5000 or 5100)
Using SPNet over IP
Only for groups using sequential or
distributed ringing
FIGURE 1-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents