Rings And Tones; Ring Cycles; Tones - Samsung OfficeServ 7400 General Description Manual

3.4 Rings and Tones

3.4.1 Ring Cycles

The OfficeServ 7400 provides trunk line rings, station rings, door rings, and alarm rings.
The ON/OFF cycle of each ring is shown in the table below:
Trunk line
Station
Door
Alarm

3.4.2 Tones

The output voltage and the frequency of the ring signals in the OfficeServ 7400 are as follows:
Output voltage: 75 V
Frequency: 20 Hz
The OfficeServ 7400 provides various tones to notify users of the status of functional op-
erations, and generally provide feedback to users. The ON/OFF cycles of currently speci-
fied tones are shown in the table below:
Dial tone
Busy Tone
Do Not Disturb tone
Ring Back tone
Call Park tone
Confirmation/Caution/Barge-In tone
Call Back/Hold tone
Error/Number Unobtainable tone
Message Camp On tone
© Samsung Business Communications
Table 3.20 System Ring Cycles
Ring
Ring ON/OFF Cycle
The ON/OFF cycle can be adjusted by changing the values in the system data-
base
Table 3.21 System Tones Cycles
Tones
OfficeServ 7400 General Description
ON/OFF Cycles
400/200/400/3000 ms
1000/2000 ms
400/200/400/200/400/2000 ms
400/200/400/200/400/200/400/1000 ms
ON/OFF Cycles
1000/250 ms
500/500 ms
250/250 ms
1000/2000 ms
Continuous
50/50 ms
500/3500 ms
250/250 ms
Continuous
3-15