Samsung Galaxy S4 User Manual page 217

Blue - Solid Indicates the AllShare Cast Hub is
ready to be connected with a new
device.
2. Connect your TV to the AllShare Cast Hub via an HDMI
cable (A-to-A cable).
3. Change the source input on your TV to match the input
port used by the incoming HDMI cable.
Note: The television screen should now display an on-screen
tutorial showing you how to configure your device's
AllShare Cast Hub and device settings.
To activate Screen Mirroring on your device:
1. From the Home screen, press
Settings
Mirroring.
2. If not already on, tap the Screen Mirroring and then
move the slider to the right to turn it on. The slider
color indicates the activation status.
and then tap
(Connections tab) Screen
Pairing AllShare Cast Hub
To pair your device and Hub for the 1st time:
1. With the TV on, locate the AllShare Hub (dongle) name
displayed at the bottom of the TV (showing the tutorial).
Ex: Name: Dongle - XXXXXX.
2. Access your device's Screen Mirroring screen and
locate the same hub/dongle name in the list.
• Tap Scan if your AllShare Cast Hub (dongle) does not appear in
the list.
3. Verify your AllShare Cast Hub is on (blinking red LED)
and the on-screen tutorial is displaying on the
connected TV.
Note: The AllShare Cast Hub communicates with your paired
device via a Wi-Fi Direct connection.
4. For a first time connection:
• Press the RESET button (located at the rear of the hub) once
and only for a second until the LED turns solid BLUE.
• Quickly tap the hub name entry on your device's AllShare Cast
screen.
Multimedia 211