Power; Number Buttons; Tune; Input - JVC HD-52Z575 User Manual

Power

Turns the TV on or off.
Press the P
Note: After turning on the power, you can not turn the power off for about one minute.
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)

Tune

Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
1 (One)
2 (Two)
Press the T

Input

Selects the signal input source for the television: INPUT-1, 2, 3 or 4 for video devices like
VCRs, DVD players, or camcorders.
Press the I
Notes:
• When you return to TV mode, press the R
• You can also access the FRONT PANEL CONTROL screen by using the M
the side of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing M
√
buttons ( OPERATE

Digital-In

Use this button to directly select the digital-in input.
Press the D
• Digital-In on the menu will display only when the 480p picture signal in Digital-In is displayed.
button
OWER
button. For example, to move to channel 12:
UNE
button
UNE
button
NPUT
† on the side panel and choose a mode by using the C
ENU
®
).
-I button
IGITAL N
Button Functions
+/TV button or direct 10 key pad.
ETURN
button on
ENU
+/-
HANNEL
57