Table of Contents
Advertisement
CAPTURING VIDEO (cont.)
Copying video
1
Click the Video button.
The amount of available storage space is
displayed in the information display panel.
2
Click the Play button.
The camcorder begins playing back the video,
and the same image appears on the PC screen.
3
Click the Capture button.
The capture operation begins.
4
Click the Capture button again.
Once conversion ends, the video file (MPEG1) is
registered in the album.
NOTE:
If the MPEG1 files cannot be converted to MPEG4
files with ImageMixer, install Windows Media™
Player (version 7 or later). Windows Media™ Player
can be loaded from Microsoft's web site:
http://www.microsoft.com/
Disconnecting the USB cable
1
Disconnect the USB cable.
2
Set the Power Switch on the camcorder to "OFF".
The camcorder turns off.
NOTES:
If you are using a Windows
case, click the Digital video camera input (1394) button in step 4 on page 32. For more details, refer to the
online help. (
pg. 29)
To copy a video as a still image, click the Still image button in step 1 of "Copying video" and perform
steps 2 – 4.
It is not possible to capture video keeping DV format. Use other DV capture application software available.
If you capture video from a tape via an optional DV cable, noise may appear depending on the type or the
performance of the hardware. In this case, use the USB cable.
®
PC, you can use a DV cable instead of a USB cable to capture video. In this
Play
Capture
Video
Information display panel
33
EN
Advertisement
Table of Contents
