JVC Network Pack SA-DV6000 User Manual page 13

Menu settings
PORT SETUP menu screen
Item Setting
✩
HTTP for WEB 1
Browser :
80
:
32767
✩
HTTP for 1
Media player :
8080
:
32767
✩
RTSP for 1
Streamproducer :
8554
:
32767
✩
RTSP for Quick 1
Time :
554
:
32767
PAGE BACK
WIRELESS LAN SETUP menu screen
Item Setting
✩
AD HOC MODE OFF
AHDM
IBSS
✩
Primary ESS ID NONE
✩
Secondary ESS ID NONE
✩
Country USA
EU
FRN
SPN
JPN
✩
CH 1CH
:
10CH
:
14CH
✩
WEP KEY
✩
LEAP ON
OFF
PAGE BACK
indicates default factory setting.
The screen for setting RTSP and HTTP port numbers appears.
HTTP for Web Browser can be set with the Web browser HTTP port number and HTTP for Media
Player can be set with the Media Player HTTP port number. RTSP for Streamproducer can be set
with the Streamproducer RTSP port number and RTSP for Quick Time can be set with the Quick
Time RTSP port number.
Normally, the unit can be used without changing the factory settings.
If there are port restrictions for the LAN environment of your PC, consult your network administrator.
* When changing a port number, refer to "5-1. Connecting with Camcorder" of the
"Streamproducer" User's Guide of the network distribution software to change port set-
tings.
* Do not use the same port numbers for RTSP and HTTP.
* When a port number is changed, switch the power of the BR-DV6000 off once, and then
switch it on again.
Pressing the SET button or SEARCH– button returns to the NETWORK SETUP menu screen.
Wireless LAN setting
OFF: Use this setting when performing communication via access point.
AHDM/IBSS: Use this setting when performing communication in AD HOC mode with a PC con-
nected with a wireless LAN card. ( page 16)
* When this item is set to AHDM or IBSS, DHCP cannot be set to ON.
Displays the wireless LAN ESS-ID input setting screen (Max. 32 alphanumerical characters)
Setting for the country using wireless LAN
USA: USA, EU: Europe, FRN: France
SPN: Spain, JPN: Japan
(Set according to operating environment.)
Wireless LAN channel setting
CH setting changes depending on the Country setting.
USA: 1 ~ 11CH, EU: 1 ~ 13CH, FRN: 10 ~ 13CH, SPN: 10, 11CH, JPN: 1 ~ 14CH
When encrypting data, set the WEP KEY (10 or 26 characters consisting or letters a ~ f and num-
bers). Must be compatible with access point authentication for the use of this item.
Set to ON when connecting a Cisco Systems wireless LAN device and using the LEAP function.
Memo
The LEAP function is exclusive to Cisco Systems wireless LAN devices. For details concerning
the LEAP function, see the instruction manual accompanying the wireless LAN device.
Pressing the SET button or SEARCH– button returns to the NETWORK MAIN SETUP menu screen.
NETWORK Settings menu screen item
Description
Description
13
→ OVER