Programming The Remote; Programming Without A Code - Quasar SP-2725 Operating Instruction

R C O
EMOTE ONTROL

Programming The Remote

The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
Procedure
• Confirm that the external component is plugged and operating.
• Turn the component off.
ACTION
• Press and
• Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
• Press the Remote Control

Programming Without A Code

This procedure searches all codes and is called the "sequence method."
• Confirm that the external component is plugged in and on.
• Turn the component off.
ACTION
• Press and
• Press appropriate component button on the Remote Control.
• Press to move forward to the next code. Press
VOL
• Press the Remote Control
Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code
isfound.
• After the code is found, press
10 ?
PERATION
Default Modes For Remote Control
Device
TV TV (Panasonic Only)
CABLE CABLE (Preset)
DBS
VCR
DVD
together, for at least 5 seconds.
to test the component. If the procedure was successful, the component will turnon.
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
together, for at least 5 seconds.
to test the component. If the procedure was successful, the component will turn on.
ACTION
to store the code.
Operates
Panasonic TV Code
Panasonic CABLE Code
DBS (Preset) Panasonic DBS Code
VCR (Preset) Panasonic VCR Code
DVD (Preset) Panasonic DVD Code
to move backward.
VOL
Default