Additional Operations; Counter Value Change; Counter Reset - JVC 0397MKV*UN*YP Instructions Manual

30

COUNTER VALUE CHANGE

If you want to replace a captured image with a different one, you can capture the new one by
changing the counter value.
Edit
Transfer the Index Image
Transfer the Full Image
Modify...
Delete
NOTE : Note that if the index image data
is saved in step 4, the hatching
pattern indicating the change will
no longer appear the next time it
is called up.

COUNTER RESET

You can change the counter setting on connected video source units (VHS, VHS-C).
Set-up
Capture Mode
Image Format
Device Change
Initialize
ID Change
Counter Reset
02
00:02:17:21
Del
02
00:01:23:12
02
00:01:23:12

ADDITIONAL OPERATIONS

1
Click the image display box of the index
number you want to change.
•The box is bordered in green.
2
Open the menu bar and click "Edit" —
"Modify...".
•The "Modify Capture Point" window
appears.
3
Enter a new counter value.
4
Click "OK".
•The index image is surrounded by a
hatching pattern indicating that a
change is being made.
•The counter value is changed to the
value you just entered.
5
Open the menu bar and click "Set-up" —
"Capture Mode" — "Automatic", then
select "Program Capture" in the "Auto-
matic Transfer" window and click "OK".
6
Play the tape on the video source unit
and click "Edit" — "Transfer the Index
Image".
•Index image data at the counter setting
is captured.
•Be sure to complete steps 1 through 7.
If they are not all followed, the index
image and the full image will be
different as the full image data will not
have been changed in step 6.
7
Click "Edit" — "Transfer the Full Image".
•Full image data at the counter setting is
transferred.
1
Open the menu bar and click "Set-up" —
"Counter Reset".
•The VCR's counter is reset.
•The counters of DV-format digital
camcorders cannot be reset.