Advertisement
DELUXE FOLDING
LIGHTWEIGHT ALUMINIUM
SELF-PROPELLED
ZT-900-900 (Self-Propelled with 45cm seat width)
Self-propelled
Please ensure that this manual is read and understood
Unit 1B Albion Works, Moor Street, Brierley Hill, West Midlands DY5 3SZ
M o b i l i t y F o r L i f e
WHEELCHAIR
ZT-900-900
"HIGH LINE"
USER MANUAL
Available Models:
•
•
•
•
•
•
•
•
•
•
•
•
before using the wheelchair
Z-Tec Mobility
Dimensions
1. Maximum weight capacity 115kg
2. Seat width 45cm
3. Frame colour red
4. Upholstery colour black
5. Seat cushion attached to seat with Velcro
strips
6. Fully Tensioned Back & Seat Webbing
7. Heel straps on Removable Footrests
8. Quick Release 56cm solid rear wheels
9. Storage pocket in back upholstery
10. Seat belt
11. Half folding backrest
12. Push Button Adjustable Armrests
Advertisement
Table of Contents
Related Manuals for Z-Tec ZT-900-900
Summary of Contents for Z-Tec ZT-900-900
-
Page 1: User Manual
M o b i l i t y F o r L i f e DELUXE FOLDING LIGHTWEIGHT ALUMINIUM SELF-PROPELLED WHEELCHAIR ZT-900-900 “HIGH LINE” USER MANUAL Available Models: ZT-900-900 (Self-Propelled with 45cm seat width) Self-propelled Dimensions 1. Maximum weight capacity 115kg • 2. Seat width 45cm • 3. Frame colour red •... -
Page 2: Safety Tips
Introduction These wheelchairs have been designed for persons with limited or no personal mobility for transport only. This user’s manual is compiled from the latest specifications and product information avail- able at the time of publication. We reserve the right to make changes as they become neces- sary. -
Page 3: Care And Maintenance
The wheelchair comes with a small toolkit to undertake simple maintenance tasks and adjustments. It is recommended that a Z-Tec dealer services the wheelchair annually where items listed below should be repaired, replaced, adjusted and/or lubricated as required. Tyre wear •... - Page 4 Handling Opening and Folding Opening Rest both hands on each of the seat upholstery support rails and press down until the seat and back upholsteries become tight. See photo 2 Make sure that the seat support rails are safely located in the support cups. Warning! Do not place your fingers between the seat upholstery and the seat tubes when opening or folding the frame.
-
Page 5: Footrest Adjustment
Footrest Adjustment Leg rest Adjustment: Footplate Adjustment: For optimum comfort it is important to The footplate has been designed to allow attain the correct leg position. The foot- for the user to be angled correctly in or- rests have been designed so that they can der to provide suitable comfort. -
Page 6: Parking Brake
Parking Brake The brakes are preset and adjustment should only be necessary if the brakes become loose or no longer function correctly. To apply the parking brake push the brake lever towards the front of the wheelchair. Push the lever back to release the brakes. See photos below. These levers are to be used by hand only. - Page 7 Do not stand or put pressure on the footrests when entering or exiting the wheelchair. Should any defects become apparent on your wheelchair or if the brakes do not respond as well as expected cease using the wheelchair immediately and return it to your Z-Tec mobil- ity dealer for inspection.
Need help?
Do you have a question about the ZT-900-900 and is the answer not in the manual?
Questions and answers